FLX000446
TamperMark™ PM 200 White Void II TC-249 V-344 Spec 50K/Q-8
Topcoated thermal transfer printable, tamper evident glossy white small void polyester film coated with a permanent pressure sensitive acrylic adhesive and backed with a kraft release liner
Request informationBenefits
- UL recognized under UL 969 - UL File No. PGGU2.MH10170 Marking and Labeling System Materials – Component
Contact: +1 508 885 8200
Features
- 2.0 mil tamper-evident white polyester film leaves behind "VOID" pattern
- Topcoat optimizes ink receptivity with most solvent and UV ink systems (please test for ink adhesion on your specific ink chemistry)
- Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, moderately rough surfaces. polycarbonate and fiberglass
- High-peel permanent acrylic adhesive resists cold flow and ooze
- Performance, aggressive, permanent pressure-sensitive adhesive bonds well to a variety of surfaces
- Backed with a 50 lb. semi-bleached kraft release liner that is Quilon®* coated
Additional Details
*Quilon® is a registered trademark of Zaclon, LLC.
Technical Data
Physical Properties
Thickness (Mils [microns]) | Mils | Microns |
---|---|---|
Total Product | 6.9 | |
Film | 2.3 +/- 10% | 58 |
Adhesive | 1.0-1.1 +/- 0.1 (3) | 25-28 |
Liner | 3.1 +/- 10% | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Dimensional Stability (%) | Value |
---|---|
MD | No shrinkage observed |
TD |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
Ultimate Peel from | Average Oz/In | (N/m) |
---|---|---|
Acrylic | 58+ | 638+ (leaves VOID pattern) |
Glass | 53+ | 583+ (leaves VOID pattern) |
Stainless Steel | 49+ | 538+ (leaves VOID pattern) |
Acrylic | 58+ | 638+ (leaves VOID pattern) |
Aluminum | 50+ | 550+ (leaves VOID pattern) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
Additional Properties | Value | Test Method |
---|---|---|
Expected Shear (hours) | ||
Tack (g) | 880 | ASTM D 2979 |
Expected Exterior Life | Film: Two years, White Coating: Turns yellow under sunlight | |
Additional Information | ||
Service Temperature | -40°F to 302°F (-40°C to 150°C), Tamper-evident maximum 104ºF (40ºF) | |
Minimum Application Temperature | 50°F (10°C), 35°F (2°C) minimum application temperature for pharmaceutical labeling on glass and HDPE | |
Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Product Details
Title | Description |
---|---|
Adhesive | Permanent |
Product Agency | N/A |
Color Family | White |
Converting | Roll Form |
Film Family | N/A |
Master Web Width | 54 |
Other Available Widths | N/A |
Print Technology | Hot Stamping, Flexographic - UV, Screen - Solvent, Flexographic - Water, Letterpress - UV, Flexographic - Solvent, Screen - UV, Offset - UV |
Surface Type | Powder Coated Paint, Paint, Metal, Ceramic, HSE Plastic, Rubber, Polycarbonate |
Surface Treatment | Dirt, Mold Release Agent, Dust, Flame Treat, Slip Agent, Corona Treat |
Surface Texture | Frosted, Smooth |
Surface Profile | Concave, Convex, Flat, Flexible, Single Curve, Recess, Rigid |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
