FLX027516
Flexcon® TamperMark™ PE 200 White Destruct TC-634 V-88 Spec 50K-8
2.0 Mil White Destructible Polyethylene, Permanent Adhesive, Paper Liner
Request informationBenefits
- Backed with a 50 lb. bleached kraft release liner ideal for roll-form converting
- Liner is suitable for optical sensing on most thermal transfer printers
Contact: +1 508 885 8200
Features
- 2.0 mil destructible white polyethylene destructs or distorts easily
- Topcoat optimizes ink receptivity with flexographic, offset and letterpress inks
- Aggressive permanent rubber based adhesive offers excellent adhesion to a wide variety of surfaces
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 6.6 | |
| Film | 2.0 +/- 10% | 51 |
| Adhesive | 1.0-1.1 +/- 0.1 | 25-28 +/- 3 |
| Liner | 3.1 +/- 10% | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.5 |
| TD | 0.5 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | Film rips | Film rips |
| Acrylic | Film rips | Film rips |
| Glass | Film rips | Film rips |
| Polypropylene | Film rips | Film rips |
| ABS | Film rips | Film rips |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 5+ (Film Rips) | ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 630 | ASTM D 2979 |
| Expected Exterior Life | Indoor use only | |
| Additional Information | ||
| Service Temperature | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 35°F (2°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 54.5 |
| Other Available Widths | N/A |
| Print Technology | Screen - Solvent, Screen - UV, Flexographic - Water, Flexographic - Solvent |
| Surface Type | Glass, HSE Plastic, LSE Plastic, Metal, Polycarbonate, Powder Coated Paint, Rubber, Ceramic |
| Surface Treatment | Dirt, Dust, Mold Release Agent, Pressure Treated, Slip Agent, Corona Treat |
| Surface Texture | Smooth, Rough |
| Surface Profile | Compound Curve, Concave, Convex, Flat, Flexible, Recess, Rigid, Single Curve |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
