FLX019922

Flexcon® RailMark™ 5372RS 4 Mil Flexible White Opaque Vinyl, Specialty RailMark™ Adhesive, and RailMark™ Logoed Liner

4 mil flexible white opaque vinyl for Subway Signage and Posters - 1, 2, or 3 Sheets

Request information

Benefits

Contact: +1 508 885 8200

Features

  • 3.4 mil flexible white opaque vinyl offers good opacity for covering previous graphics
  • Provides good resistance to scuffing, tearing and abrasion
  • Excellent printability via UV screen, solvent screen, UV offset, UV inkjet, solvent inkjet, and latex
  • High-performance adhesive system is designed to adhere to smooth surfaces as well as
    rough-textured surfaces
  • Adhesive bonds well to PVC, varnished wood, lumber/wood, paint, and ceramic
  • Backed with a two-side poly coated 90 lb. layflat release liner with the RailMark™ logo for ease of identification by printers and installers

Additional Details

For Inkjet Printing: • Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming

For installation instructions, visit: Flexcon's Transit Technical Guide and Installation Instructions

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Total Product 11.65
Film 3.5 +/- 10%89
Adhesive1.6-1.7 +/- 0.141-43 +/- 3
Liner6.9 +/- 10%175

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD 1
TD 0.75

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel56616
Ceramic Tile43473
Painted Sheetrock27297
Painted/Sealed Concrete33363
Wood - Bare39429

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear (hours)10ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack (g)720ASTM D 2979
Expected Exterior LifeTwo years
Additional Information Additional Adhesion Properties (N/m / Oz/In): , Stained + Varnished Wood - 363/33
Service Temperature -40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityShelf life of 2 years unprinted, or 1 year processed and applied. Store at 70°F (21°C) and 50% relative humidity; out of direct sunlight.

Product Details

TitleDescription
AdhesivePermanent
Product AgencyOUTFRONT Media
Color FamilyWhite
ConvertingSheet Form
Film FamilyN/A
Master Web Width62
Other Available WidthsN/A
Print TechnologyScreen - Solvent, Inkjet - UV Wide Format, Screen - UV, Inkjet - HP Latex, Inkjet - Solvent
Surface TypeCeramic, Lumber/Wood, Paint, PVC, Varnished Wood, Unsealed Concrete
Surface TreatmentVarnish
Surface TextureRough
Surface ProfileFlat

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.

contact