FLX018613
Flexcon® DigiPro® DGPW
2.0 Mil White Polyester, Permanent Adhesive, Roll-Form Liner
Request informationBenefits
- UL recognized under UL 969 - UL File No. PGGU2.MH10170 Marking and Labeling System Materials - Component when overlaminated with Flexcon® DPM® CG or DPM® UVCG.
Contact: +1 508 885 8200
Features
- 2.0 mil gloss topcoated white polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
- Topcoat is specifically designed for digital printing with HP Indigo inks and ensures excellent ink receptivity for sharp vibrant image quality
- Varnishing or overlaminating is recommended to protect graphics from abrasion
- Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, moderately rough surfaces. polycarbonate and fiberglass
- High-peel permanent acrylic adhesive resists cold flow and ooze
- Performance, aggressive, permanent pressure-sensitive adhesive bonds well to a variety of surfaces
- Backed with a 50 lb. bleached kraft release liner ideal for roll-form converting
- Liner is suitable for optical sensing on most thermal transfer printers
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 6.37 | |
| Film | 2.0 +/- 10% | 51 |
| Adhesive | 0.9-1.0 +/- 0.1 (3) | 25-28 |
| Liner | 3.1 +/- 10% | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
Test Method:
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 55 | 605 |
| Acrylic | 68 | 748 |
| Glass | 56 | 606 |
| Polypropylene | 12 | 132 |
Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | 360 | ASTM D 2979 |
| Expected Exterior Life | Indoor use only unless overlaminated with DPM® CVE or DPM® UVCG | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | One year stored at 70°F (21°C) and 50% RH |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | UL_UL PGGU2 Recognized Printed w/Indigo 4500 or 6000 When Overlaminated w/DPM CG or DPM UVCG |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | HP Indigo |
| Surface Type | Metal, HSE Plastic, Paint, Polycarbonate, Glass |
| Surface Treatment | Dust, Ink, Varnish, Dirt |
| Surface Texture | Smooth, Frosted |
| Surface Profile | Convex, Flat, Recess, Single Curve |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
