FLX000324
Flexcon® DPM® UVCG 1 Mil Clear UV Polyester Overlaminate Adhesive Film Liner Over Rolls and Sheets
Durable Goods and Equipment Labeling Clear UV Resistant Polyester - Overlaminate
Request informationBenefits
- Permanent pressure-sensitive acrylic adhesive bonds well to base film substrates
- Overlaminating polyester resists temperature extremes, abrasion and chemical exposure for maximum label protection
Contact: +1 508 885 8200
Features
- 1.0 mil clear gloss overlaminating polyester that protects against damaging UV rays, moisture & scratching
- Backed with a clear 1 mil PET release liner that results in good adhesive clarity
- UL recognized under UL 969 – UL File No.PGGU2.MH10170 Marking and Labeling System Materials –Component
- CSA accepted under CSA File No. 99214
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 2.8 | |
| Film | 1.0 +/- 10% | 25 |
| Adhesive | 0.9-1.0 +/- 0.1 | 23-25 +/- 3 |
| Liner | 1.0 +/- 5% | 25 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 42 | 462 |
| Acrylic | 47 | 517 |
| Glass | 42 | 462 |
| Polypropylene | 14 | 154 |
Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | 410 | ASTM D 2979 |
| Expected Exterior Life | Five years (Based on 2000 hour weathering in Xenon) | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Overlaminating |
| Product Agency | UL_UL Recognized, CSA_CSA Acceptance |
| Color Family | Clear |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | N/A |
| Surface Type | Paper/Fiber, HSE Plastic, Glass, Paint, Powder Coated Paint, Metal, Fiberglass, LSE Plastic |
| Surface Treatment | Varnish, Ink |
| Surface Texture | N/A |
| Surface Profile | Recess, Flat, Concave, Convex, Single Curve |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
