FLX070378
Flexcon® OptiFlex® PP 200 F White PTP V-81 TracRite™ 92
Printed-Treated 2.0 Mil Flexible White Polyolefin, Permanent Adhesive. 0.92 Mil PET Liner
Request informationBenefits
- Conformable, flexible polyolefin film contours to squeeze (excluding tubes) and semi-squeeze container types
- High-gloss white film's opacity is ideal for achieving high-impact graphics and the no-label-look on white containers
- Release liner provides a good diecutting base and allows for high-speed dispensing
- Order custom widths without purchasing a whole master through Flexcon® FlexChoice™ for Packaging
Contact: +1 508 885 8200
Features
- 2.0 mil print-treated white polyolefin film provides consistent surface smoothness and excellent dimensional stability
- Compatible with a wide range of inks including UV, solvent, and water flexo, UV screen, UV offset, UV letterpress, and hot stamping
- Aggressive permanent acrylic adhesive, adheres to a wide range of container types including low-surface HDPE
- Backed with a Flexcon® TracRite™ 92 polyester release liner for excellent on-press performance for tight-registration graphics
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 3.27 | |
| Film | 1.8 | 45 |
| Adhesive | 0.5-0.6 | 13-15 |
| Liner | 0.92 | 23 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0 |
| TD | 0 |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 49 | 539 |
| Acrylic | 44 | 484 |
| Glass | 48 | 528 |
| Polypropylene | 7 | 77 |
Test Method: ASTM D 903 (Modified for 72 hr dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 10 | ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 590 | ASTM D 2979 |
| Expected Exterior Life | Indoor use only | |
| Additional Information | ||
| Service Temperature | -40°F to 212°F (-40°C to 100°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 76 |
| Other Available Widths | N/A |
| Print Technology | Flexographic - UV, Letterpress - UV, Offset - UV, Screen - UV, Flexographic - Water, Flexographic - Solvent |
| Surface Type | HDPE, HSE Plastic, LSE Plastic, Metal, PET, Polypropylene, PVC, Glass |
| Surface Treatment | Corona Treat |
| Surface Texture | Rough, Smooth, Frosted |
| Surface Profile | Concave, Convex, Flat, Flexible, Recess, Rigid, Single Curve, Compound Curve |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
