FLX070146

Flexcon® OptiFlex® PP 200 H CLEAR TC-458 V-611 SPEC 40K-8

Secondary Labeling Clear Polypropylene with Removable Adhesive

Home Technical Data and Details Availability

Benefits

  • Polypropylene is more economical and conformable than polyester and provides a good diecutting base
  • Adhesive complies with FDA 175.105 for indirect food contact
  • Order custom widths without purchasing a whole master through Flexcon® FlexChoice™ for Packaging

Click to view PDF

Contact: +1 508 885 8200

Features

  • Topcoated 2.0 mil hard clear polypropylene (BOPP) offers excellent resistance to shrinkage, moisture, humidity, and product contents
  • Film clarity is ideal for achieving the no-label-look
  • Excellent surface smoothness allows for optimum ink laydown
  • General-purpose removable adhesive provides minimal adhesion bond over time ensuring clean removability
  • Adheres to a wide range of container types
  • Printable via UV, solvent & water, flexo, UV inkjet (Xeikon Jetrion 4000 series and Domino), UV screen, UV letterpress, and hot stamping
  • 40 lb. bleached white kraft release liner ideal for roll-form converting


Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10 %51
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner2.5 +/- 10 %64

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD 0.5
TD 0.5

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel17187
Glass14154
Polypropylene14154
Polyethylene666
Aluminum23253

Test Method: ASTM D 903 (Modified for 72 hr dwell time)

Additional PropertiesValueTest Method
Expected Shear100ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load)
Tack290ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -20°F to 212°F (-29°C to 100°C)
Minimum Application Temperature 40°F (4°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesiveRemovable/Repositionable
Product AgencyN/A
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyLetterpress - UV, Screen - UV, Flexographic - Water, Offset - UV, Flexographic - Solvent, Hot Stamping, Inkjet - UV Narrow Format, Flexographic - UV
Surface TypeLSE Plastic, HDPE, Glass, Metal, Polycarbonate, Polypropylene, Stainless Steel, PET, Aluminum, HSE Plastic
Surface TreatmentN/A
Surface TextureSmooth
Surface ProfileConcave, Flat, Convex, Recess, Rigid, Compound Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.