FLX070144
Flexcon® OptiFlex® PP 230 H White TC-458 V-611 Spec 40K-8
Secondary Labeling White Polypropylene with Removable Adhesive
Request informationBenefits
- Polypropylene is more economical and conformable than polyester and provides a good diecutting base
- Adhesive complies with FDA 175.105 for indirect food contact
- Order custom widths without purchasing a whole master through Flexcon® FlexChoice™ for Packaging
Contact: +1 508 885 8200
Features
- Topcoated 2.3 mil hard white polypropylene offers excellent resistance to shrinkage, moisture, humidity, and product contents
- Film opacity is ideal for achieving high impact graphics
- Excellent surface smoothness allows for optimum ink laydown
- Printable via UV, solvent & water flexo, UV inkjet (Xeikon Jetrion 4000 series and Domino), UV screen, UV letterpress, and hot stamping
- General-purpose removable adhesive provides minimal adhesion bond over time ensuring clean removability
- Adheres to a wide range of container types
- 40 lb. bleached white kraft release liner ideal for roll-form converting
Technical Data
Physical Properties
Thickness (Mils [microns]) | Mils | Microns |
---|---|---|
Total Product | 5.65 | |
Film | 2.3 +/- 10 % | 58 |
Adhesive | 0.5-0.6 +/- 0.1 | 13-15 +/- 3 |
Liner | 2.5 +/- 10 % | 64 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
Dimensional Stability (%) | Value |
---|---|
MD | 0.5 |
TD | 0.5 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
Ultimate Peel from | Average Oz/In | (N/m) |
---|---|---|
Stainless Steel | 17 | 187 |
Glass | 14 | 154 |
Polypropylene | 14 | 154 |
Polyethylene | 6 | 66 |
Aluminum | 23 | 253 |
Test Method: ASTM D 903 (Modified for 72 hr dwell time)
Additional Properties | Value | Test Method |
---|---|---|
Expected Shear (hours) | 100 | ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
Tack (g) | 290 | ASTM D 2979 |
Expected Exterior Life | Indoor use only | |
Additional Information | ||
Service Temperature | -20°F to 212°F (-29°C to 100°C) | |
Minimum Application Temperature | 40°F (4°C) | |
Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
Title | Description |
---|---|
Adhesive | Removable |
Product Agency | N/A |
Color Family | White |
Converting | Roll Form |
Film Family | N/A |
Master Web Width | 60 |
Other Available Widths | N/A |
Print Technology | Screen - UV, Flexographic - Water, Offset - UV, Inkjet - UV Narrow Format, Hot Stamping, Letterpress - UV, Flexographic - UV, Flexographic - Solvent |
Surface Type | Aluminum, Glass, Polypropylene, Stainless Steel, Polycarbonate, LSE Plastic, PET, Metal, HSE Plastic, HDPE |
Surface Treatment | N/A |
Surface Texture | Smooth |
Surface Profile | Compound Curve, Flat, Recess, Rigid, Concave, Convex |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
