FLX007007
Flexcon® CompuCal II® TamperMark™ MM 200 Silver Checkerboard MTC-329 L-156 Spec 50K-8
Security / Authenticity Labeling Silver Polyester - Checkerboard Pattern
Request informationBenefits
- UL recognized under UL 969 - UL File No. PGGU2.MH10170 Marking and Labeling System Materials - Component and UL File No. PGJI2.MH16635 Printing Materials - Component
- View UL PGUU2 for Flexcon® CompuCal II® TamperMark™ Silver Checkerboard Yellow Card
- View UL PGJI2 for Flexcon® CompuCal II® TamperMark™ Silver Checkerboard Yellow Card
Contact: +1 508 885 8200
Features
- Matte topcoated 2.0 mil silver tamper-evident polyester provides consistent surface smoothness, excellent dimensional stability, and endurance to varying temperatures
- Leaves behind "Checkerboard" pattern
- Printable via UV and solvent screen, UV and water flexo, UV and oil offset, UV letterpress, wax/resin & wax thermal transfer, dry toner, and laser
- High-performance, aggressive permanent acrylic adhesive provides a permanent bond to a wide range of surfaces, including powder coated paint and metal
- Backed with a 50 lb. bleached kraft release liner ideal for roll-form converting
- Liner is suitable for optical sensing on most thermal transfer printers
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 7.1 | |
| Film | 2.5 +/- 10 % | 64 |
| Adhesive | 1.0-1.1 +/- 0.1 (3) | 25 - 28 |
| Liner | 3.1 +/- 10 % | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | Shows tampering upon removable | |
| Acrylic | ||
| Glass |
Test Method:
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 5 | ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 880 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) Tamper-evident maximum 104°F (40°C) | |
| Minimum Application Temperature | 32°F (0°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Product Details
| Title | Description |
|---|---|
| Adhesive | N/A |
| Product Agency | N/A |
| Color Family | Silver |
| Converting | N/A |
| Film Family | N/A |
| Master Web Width | 54 |
| Other Available Widths | N/A |
| Print Technology | N/A |
| Surface Type | N/A |
| Surface Treatment | N/A |
| Surface Texture | N/A |
| Surface Profile | N/A |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
