FLX006999

CompuCal II® TamperMark™ MM 200 Silver Void MTC-329 L-156 Spec 50K/Q-8

Security / Authenticity Labeling Silver Polyester - Void Pattern

Home Technical Data and Details Availability

Benefits

  • Designed for applications requiring tamper evidence

Click to view PDF

Contact: +1 508 885 8200

Features

  • Matte topcoated 2.0 mil silver matte polyester provides consistent surface smoothness, excellent dimensional stability, and endurance to varying temperatures
  • Printable via UV and solvent screen, UV and water flexo, UV and oil offset, UV letterpress, wax/resin & wax thermal transfer, dry toner, and laser
  • High-performance, aggressive permanent acrylic adhesive provides a permanent bond to a wide range of surfaces, including powder coated paint and metal
  • Backed with a 50 lb. semi-bleached kraft release liner that is Quilon®* coated to prevent label pick-off

Additional Details

*Quilon® is a registered trademark of Zaclon, LLC.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.5 +/- 10 %64
Adhesive 1.0-1.1 +/- 0.125-28 +/- 3
Liner3.1 +/- 10 %79

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless SteelThis product shows tampering w
AcrylicThis product shows tampering w
GlassThis product shows tampering w

Test Method: ASTM D 903 (Modified for 72 hr. dwell time)

Additional PropertiesValueTest Method
Expected Shear5ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack880ASTM D 2979
Expected Exterior LifeTwo years
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C) Tamper-evident maximum 104°F (40°C)
Minimum Application Temperature 32°F (0°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesiveN/A
Product AgencyCSA_CSA Acceptance, UL_UL Recognized
Color FamilySilver
ConvertingRoll Form
Film FamilyN/A
Master Web Width54
Other Available WidthsN/A
Print TechnologyN/A
Surface TypeN/A
Surface TreatmentN/A
Surface TextureN/A
Surface ProfileN/A

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.