FLX069870

Flexcon® MedFlex® Plus MMSMGS50K

Medical Device Labeling Gloss Topcoated 2 Mil Silver Matte Polyester Permanent Adhesive Roll Liner UL Recognized

Request information
Home Technical Data and Details Availability

Benefits

  • Topcoat and adhesive are 21 CFR175.105 indirect food contact compliant
  • View UL PGJI2 for Flexcon® MedFlex® Plus MMSMGS50K Yellow Card
  • Compliant with IEC 60601-1 3rd edition marking durability rub tests, and UL/cUL Verified (Verified ID: V487460). Exceeding marking durability requirements with 6 additional cleaning agents: Microban, Lysol®* wipes, quaternary ammonium, hypochlorite, 3% and 32% (food-grade) hydrogen peroxide, and phenol disinfectant spray
  • 6-month change notification

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.0 mil gloss topcoated silver matte polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
  • Topcoat provides excellent resistance to chemicals, moisture, smudging and scratching
  • Permanent solvent-based acrylic biocompatible pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass without lifting
  • Backed with a 50 lb. bleached kraft release liner made from up to 30% post-consumer waste, ideal for roll-form converting
  • Liner is suitable for optical sensing on most thermal transfer printers

Additional Details

All narrow-format UV inkjet systems are different; therefore, we recommend "fit-for-use" testing. For laser diecutability, please check with your equipment manufacturer.

Please Note: MedFlex® Plus is not intended for direct skin contact nor for implantable devices.

*Lysol® is a registered trademark of Reckitt Benckiser LLC.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Total Product 6.45
Film 2.0 +/- 10%51
Adhesive0.9-1.0 +/- 0.1 (3)23-25
Liner3.1 +/- 10%79

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic77847
Glass68748
Polypropylene15165
Stainless Steel55605
ABS60660

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear (hours)
Tack (g)1030ASTM D 2979
Expected Exterior LifeTwo years
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesivePermanent
Product AgencyUL_UL Recognized, CUL_CUL Recognized
Color FamilySilver Matte
ConvertingRoll Form
Film FamilyN/A
Master Web Width54
Other Available WidthsN/A
Print TechnologyLetterpress - UV, Offset - UV, Screen - Solvent, Flexographic - Water, Flexographic - Solvent, Screen - UV, Flexographic - UV, Inkjet - UV Narrow Format
Surface TypeSteel, Stainless Steel, Powder Coated Paint, ABS, Aluminum, Fiberglass, Glass, HDPE, HSE Plastic, LSE Plastic, Metal, Paint, Paint (non-vinyl based), PET, Polycarbonate, Polypropylene, PVC, Styrene, TPO Plastic
Surface TreatmentN/A
Surface TextureRough, Frosted, Smooth
Surface ProfileRigid, Flat

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.

contact