FLX069087
Flexcon® PharmCal® TamperMark™ 069087 (PharmCal® DA 200 Clear V-88 Spec 50K/Q-8)
2.0 Mil Clear Diacetate (Destructible), Permanent Adhesive, Paper Liner
Request informationBenefits
- Destructible film prevents relabeling onto counterfeit package
- Diacetate offers excellent clarity for no-label-look on containers
- Quilon®* coated to prevent label pick-off
- Ideal for FDA 21CFR 211.132 and EU Falsified Medicines Directive (FMD) regulations for tamper-proof labeling and packaging
- 6-month change notification
Contact: +1 508 885 8200
Features
- 2.0 mil clear diacetate film for destructible applications
- Printable surface is compatible with most standard flexographic ink
- Aggressive permanent rubber based adhesive offers excellent adhesion to plastic containers, cardboard, and packaging materials
- Backed with a 50 lb. semi-bleached kraft release liner that is Quilon®* coated
Additional Details
Recommendations: Printing/converting trials are highly recommended prior to full scale manufacturing
*Quilon® is a registered trademark of Zaclon LLC
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 6.2 | |
| Film | 2.0 +/- 10 % | 51 |
| Adhesive | 1.0-1.1 +/- 0.1 | 25-28 +/- 3 |
| Liner | 3.1 +/- 10 % | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
Test Method:
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Carboard Box | 12+ | 132+ box surface splits |
| HDPE | 20 | 220 |
| Polyester | 98 | 1078 |
| Printed Box (no varnish) | 12+ | 132+ box surface splits |
| Printed Box (varnished) | 16 | 176 |
Test Method: ASTM D 903 (Modified for 72 hr dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 100+ | ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 1340 | ASTM D 2979 |
| Expected Exterior Life | Indoor use only | |
| Additional Information | Use with plasticized vinyl surface or removal and then relamination of liner is not recommended. | |
| Service Temperature | -40°F to 200°F (-40°C to 90°C) | |
| Minimum Application Temperature | 50°F (10°C); 35°F (2°C) for pharmaceutical labeling on glass and HDPE | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | Clear |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 52 |
| Other Available Widths | N/A |
| Print Technology | Letterpress - UV, Offset - UV, Flexographic - Water, Screen - UV, Hot Stamping, Screen - Solvent, Flexographic - UV, Inkjet - UV Narrow Format, Flexographic - Solvent |
| Surface Type | LSE Plastic, Metal, Paper/Fiber, Polypropylene, TPO Plastic, Glass, HDPE, HSE Plastic, Aluminum |
| Surface Treatment | Varnish, Wax, Ink |
| Surface Texture | Rough, Smooth, Frosted |
| Surface Profile | Recess, Rigid, Single Curve, Flat |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
