FLX069047

Flexcon® PharmCal® Conceal™ 069047

PharmCal® PPM 230 H White Opaque TC-332™ V-344 SPEC 50K-8

Home Technical Data and Details Availability

Benefits

  • Biocompatible adhesive mitigates risk of migration through packaging
  • Film provides excellent resistance to shrinkage, moisture, humidity and product contents
  • 21 CFR 175.105, REACH, RoHS/ WEE, and ISO 10993-5,-10 compliant*
  • 6-month change notification

Click to view PDF

Contact: +1 508 885 8200

Features

  • Gloss topcoated 2.3 mil hard white opaque polypropylene (BOPP) metallized on one side for concealing package contents or covering over existing label
  • Topcoat optimizes printability via narrow-format UV inkjet, flexographic, UV screen, UV letterpress, UV offset, thermal transfer, and hot stamping
  • Permanent aggressive adhesive provides a high ultimate bond, and excellent tack, clarity, and wet out characteristics
  • High-adhesive performance bonds to tight-radius glass or plastic containers
  • Backed with a 50 lb. bleached kraft release liner ideal for roll-form converting
  • Liner is suitable for optical sensing on most thermal transfer printers

Additional Details

*FDA CFR 175.105: Adhesives may be safely used as components of articles intended for use in packaging, transporting, or holding food in accordance with the prescribed conditions. ISO 10993 Biological evaluation of medical devices: Part 5:Tests for in vitro cytotoxicity; Part 10:Tests for irritation and skin sensitization.

“Fit-for-use” testing is recommended under actual application conditions.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.3 +/- 10%58
Adhesive 0.8-0.9 +/- 0.120-23 +/- 3
Liner3.1 +/- 10%79

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Glass47517
Polypropylene14154

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear75ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load)
Tack850ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyFlexographic - Solvent, Flexographic - Water, Hot Stamping, Offset - UV, Screen - Solvent, Screen - UV, Inkjet - UV Narrow Format, Letterpress - UV, Flexographic - UV
Surface TypeHDPE, HSE Plastic, Glass
Surface TreatmentN/A
Surface TextureSmooth
Surface ProfileRigid, Single Curve, Flat

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.