FLX068903

Flexcon® PharmCal® OTC 068903 (PharmCal® PP 230 H White TC-458 V-449 TracRite™ 120)

2.3 Mil White Polypropylene, Permanent Adhesive, Poly Liner

Home Technical Data and Details Availability

Benefits

  • Film opacity is ideal for achieving high impact graphics
  • Excellent resistance to shrinkage, high temperatures, moisture, humidity and product contents
  • Polypropylene is more economical and conformable than polyester and provides a good diecutting base
  • Excellent surface smoothness allows for optimum ink laydown
  • Release liner provides excellent on-press performance for tight-registration graphics, a good diecutting base and allows for high-speed dispensing
  • Meets Compliance Regulations: 21 CFR 175.105, RoHS/WEE, and REACH
  • 3-month change notification


Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.3 mil hard white polypropylene offers excellent resistance to shrinkage, moisture, humidity, and product contents
  • Conformable film contours around cylindrical packaging
  • Print-receptive surface is printable via flexographic, UV offset, gravure, UV screen, UV letterpress, thermal transfer, narrow-format UV inkjet, and hot stamping
  • Permanent high-tack, high-peel adhesive with excellent performance on plastic containers
  • Flexcon® TracRite™ 120 polyester release liner 

Additional Details

FDA CFR 175.105: Adhesives may be safely used as components of articles intended for use in packaging, transporting, or holding food in accordance with the following prescribed conditions.

“Fit-for-use” testing is recommended under actual application conditions.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.3 +/- 10%58
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner1.2 +/- 5%30

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Glass40440
Polypropylene23253

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear10ASTM D 3654 Method A (1 hr. dwell, 1 sq. in. surface, 4 lb. load)
Tack790ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 35°F (1.7°C)
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyFlexographic - Water, Inkjet - UV Narrow Format, Flexographic - UV, Flexographic - Solvent
Surface TypeHSE Plastic, HDPE, Glass
Surface TreatmentN/A
Surface TextureSmooth
Surface ProfileRigid, Single Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.