FLX068902

PharmCal® OTC 068902 (PHARMcal® PP 200 H CLEAR TC-458 V-449 TRACrite™ 120)

Home Technical Data and Details Pricing Quick-Ship

Features & Benefits

  • 2.0 mil hard clear polypropylene offers excellent resistance to shrinkage, high temperatures, moisture, humidity and product contents
  • Film clarity is ideal for achieving the no-label-look on clear OTC containers
  • Conformable film contours around cylindrical packaging
  • Print-receptive surface is printable via flexographic, UV offset, gravure, UV screen, UV letterpress, narrow-format UV inkjet, and hot stamping
  • Permanent high-tack, high-peel adhesive with excellent performance on plastic containers
  • Flexcon® TracRite™ 120 polyester release liner provides excellent on-press performance for tight-registration graphics
  • Liner provides an excellent die cutting base, and allows for high-speed dispensing and matrix stripping
  • Meets Compliance Regulations: 21 CFR 175.105, RoHS/WEE, and REACH
  • 3-month change notification

*FDA CFR 175.105: Adhesives may be safely used as components of articles intended for use in packaging, transporting, or holding food in accordance with the following prescribed conditions.
“Fit-for-use” testing is recommended under actual application conditions.

Product Applications

  • Supreme - Healthcare - Pharmaceutical - OTC Label
  • Better - Healthcare - Pharmaceutical - OTC Label
Click to print

Contact: +1 508 885 8200

Technical Data

Physical Properties

ValueThickness (Mils[microns])
Film2.0 (51) +/- 10%
Adhesive 0.5-0.6 (13-15) +/- 0.1 (3)
Liner1.2 (30) +/- 5%

Test Method: ASTM D 3652 (Modified for use with non-tape products)

ValueDimensional Stability (%)
No Shrinkage Observed

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Glass40(440)
Polypropylene23(253)

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Expected Shear

PropertyValueTest Method
Expected Shear Room Temp (hours): 10ASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load
Tack (gm/sq cm)790ASTM D 2979
Expected Exterior LifeIndoor use only
Service Temperature Range-40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature35°F (1.7°C)
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

Title Description
Adhesive Permanent
Product Agency N/A
Color Family Clear
Converting Roll Form
Double Face N
Film Family Polypropylene
Master Web Width 60.000
Other Available Widths 60.00
Print Technology Solvent Flexo,Thermal Transfer,UV Flexo,UV Inkjet - Narrow,Water Flexo
Quilon N
Remoist N
Surface Type Glass,HDPE,HSE Plastic
Surface Treatment N/A
Surface Texture Smooth
Surface Profile Rigid,Single Curve

Pricing Overview

MSI Pricing

Roll Pricing

SQF Pricing

Historical Sales

Please log in to view sales figures.

Product Performance and Suitability

All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.

Modified on: