FLX068768
Flexcon® ThermlFilm® PM 200 White TC-716 V-156 Spec 50K/Q-9 (1.3-1.4)
White Polyester
Request informationBenefits
- Topcoat is more universally printable than other thermal transfer printable products
Contact: +1 508 885 8200
Features
- 2.0 mil white gloss topcoated polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
- Printable via resin and wax/resin thermal transfer; UV & solvent screen; UV, solvent & water flexo; and UV inkjet
- High-adhesive bond onto plastic containers, cardboard, and packaging materials
- Backed with a 50 lb. semi-bleached kraft release liner that is Quilon® coated
Additional Details
*Quilon® is a registered trademark of Zaclon, LLC.
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 6.95 | |
| Film | 2.0 +/- 10 % | 51 |
| Adhesive | 1.3-1.4 +/- 0.1 | 33-36 +/- 3 |
| Liner | 3.1 +/- 10 % | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD | No shrinkage observed |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 118 | 1298 |
| Acrylic | 132 | 1452 |
| Glass | 129 | 1419 |
| Polypropylene | 15 | 165 |
Test Method: ASTM D 903 (Modified for 72 hr. dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 10 | ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 870 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 32°F (0°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Inkjet - UV Wide Format, Flexographic - Water, Inkjet - UV Narrow Format, Offset - UV, Flexographic - Solvent, Inkjet - Solvent, Screen - Solvent, Flexographic - UV, Screen - UV, Hot Stamping |
| Surface Type | HSE Plastic, Linoleum, LSE Plastic, Lumber/Wood, Metal, PET, Bronze, Ceramic, Ceramic Tile (some), Flexible Magnet, ABS, Glass, HDPE, Polycarbonate, Polypropylene, Powder Coated Paint, PVC Tile, Stainless Steel, ABS Textured, Aluminum |
| Surface Treatment | N/A |
| Surface Texture | Rough, Smooth |
| Surface Profile | Flat, Rigid, Flexible |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
