FLX068713
Flexcon® NexGen™ MSP344S Matte Topcoated 2 Mil Silver PET High Permanent Adhesive Sheet Liner UL Recognized
2 MIL Matte Topcoated Silver Polyester - Sheet Form
Request informationBenefits
- CUL Recognized, L- Adhesives, UL Recognized
- High shear and high peel adhesive resists cold flow and oozing
- Adhesive bonds well to base film substrates
Contact: +1 508 885 8200
Features
MM 200 SILVER MTC-722 L-344 92 FC PFW
- Matte topcoated 2.0 mil silver polyester provides consistent surface smoothness, excellent dimensional stability, and endurance to varying temperatures
- Topcoat provides excellent resistance to chemicals, moisture, smudging and scratching
- Printable via resin and wax/resin thermal transfer; UV & solvent screen; UV, solvent & water flexo; laser (toner); and narrow-format UV inkjet
- Matte filled topcoat allows for successful printing with a wider range of wax/resin ribbons
- Unique matte topcoat allows for greater than four times as many die revolutions before retooling compared with competing label materials
- Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass
- 90 lb. moisture stable polycoated release liner is ideal for roll-to-sheet and sheet-form converting on most narrow-format presses
Additional Details
All narrow-format UV inkjet systems are different; therefore, we recommend "fit-for-use" testing.For laser diecutability, please check with your equipment manufacturer.
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 9.85 | |
| Film | 2.1 +/- 10% | 53 |
| Adhesive | 0.9-1.0 +/- 0.1 (3) | 23-25 |
| Liner | 6.9 +/- 10% | 175 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No Shrinkage Observed |
| TD |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Acrylic | 77 | 847 |
| Stainless Steel | 55 | 605 |
| Glass | 68 | 748 |
| Polypropylene | 15 | 165 |
| Aluminum | 54 | 594 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | 360 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | UL_UL Recognized, CUL_CUL Recognized |
| Color Family | Silver |
| Converting | Roll to Sheet |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Flexographic - UV, Inkjet - UV Narrow Format, Screen - Solvent, Screen - UV, Flexographic - Solvent, Offset - UV |
| Surface Type | N/A |
| Surface Treatment | N/A |
| Surface Texture | N/A |
| Surface Profile | N/A |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
