FLX066555
Flexcon® WindowDeco™ 6545
2.0 Mil Clear Polyester, Removable Adhesive, 4.0 Mil Poly Liner
Request informationBenefits
- Polyester provides an exceptional level of clarity, yielding sharp crystal-clear window graphics
- Graphics look "painted on" glass
Contact: +1 508 885 8200
Features
- 2.0 mil super clear polyester designed for exterior- or interior-mount window applications
- Printable via UV screen and UV inkjet
- Removable pressure-sensitive adhesive bonds well to smooth non-tinted glass
- 4.0 mil super clear polyester release liner aids in ultra-smooth adhesive clarity
- Liner has excellent layflat characteristics - improves feeding and tracking through converting equipment
- Liner has backside coating for anti-static properties (helps to eliminate sheets "blocking" together when stacked)
- Ideal for roll-to-roll, roll-to-sheet and sheet-to-sheet converting
Additional Details
Please note: The wet method (glass and graphic side) with a nylon squeegee is recommended for installation.
Please refer to Flexcon's Window Graphics Installation Guide for more information.
For Inkjet Printing:
• Typical max. ink limit = 250%
• When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 7.06 | |
| Film | 2.0 +/- 10% | 51 |
| Adhesive | 0.7-0.8 +/- 0.1 (3) | 18-20 |
| Liner | 4.0 +/- 10% | 102 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.25 |
| TD | 0.25 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Non-tinted Glass | 11 | 121 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | 300 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | Removability, Six months | |
| Service Temperature | -20°F to 302°F (-29°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Product Details
| Title | Description |
|---|---|
| Adhesive | Removable |
| Product Agency | N/A |
| Color Family | Clear |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Screen - UV, Inkjet - UV Wide Format |
| Surface Type | Glass |
| Surface Treatment | N/A |
| Surface Texture | Smooth |
| Surface Profile | Single Curve, Flat |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
