FLX058733
Flexcon® FlexMark® PM 500 Clear PTP SA1000 M-300-W
High-Temperature Maskant Clear Overlaminating Polyeste
Request informationBenefits
Easily applied by hand
Contact: +1 508 885 8200
Features
- 5.0 mil clear print treated polyester provides excellent clarity for specialty masking
- Print-treated polyester resists temperature extremes, abrasion and chemical exposure for maximum protection
- Flexcon® SA1000 adhesive is excellent for high-temperature masking applications
- Adhesive offers clean removability, as well as performance at temperatures as high as 400°F
- Superior adhesion to smooth surfaces, while providing consistent, clean, quiet removability
- Backed with a 3.0 mil white polyester carrier ideal for adhesive wet out
Additional Details
End Use Applications: Display screen protection in factory environments, display screen protection of consumer and industrial electronics, replaceable masking and protection of equipment.
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 9.42 | |
| Film | 5.0 +/- 10% | 127 |
| Film 2 | 3.0 +/- 10% | 76 |
| Adhesive | 1.1-1.2 +/- 0.1 (3) | 25-28 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | Less than 1.0 | (Less than 11) |
| Acrylic | Less than 1.0 | (Less than 11) |
| Glass | Less than 1.0 | (Less than 11) |
| Polypropylene | Less than 1.0 | (Less than 11) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | 60 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) [Film Dependant] | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Product Details
| Title | Description |
|---|---|
| Adhesive | Removable |
| Product Agency | N/A |
| Color Family | Clear |
| Converting | Roll to Sheet |
| Film Family | N/A |
| Master Web Width | 54 |
| Other Available Widths | N/A |
| Print Technology | Screen - Solvent, Inkjet - UV Narrow Format, Letterpress - UV, Flexographic - Solvent, Flexographic - UV, Screen - UV, Offset - UV |
| Surface Type | HSE Plastic, LSE Plastic, Metal, PET, Silicone, TPO Plastic, Glass, Ceramic |
| Surface Treatment | N/A |
| Surface Texture | Smooth |
| Surface Profile | Rigid, Flat |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
