Benefits
- Adhesive complies with FDA 175.105 for indirect food contact
Contact: +1 508 885 8200
Features
- 2.45 mil flexible white polypropylene offers good diecutting properties and excellent resistance to a variety of environments
- Print-receptive film provides uniform and consistent printability* via rotary letterpress, rotary screen and flexography
- High-performance, permanent acrylic adhesive adheres to a wide range of container types including low-surface energy HDPE
- Backed with a 44 lb. polycoated natural Kraft release liner ideal for roll-form converting
Additional Details
*In-line corona treatment recommended to enhance print receptivity
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 6.55 | |
| Film | 2.35 +/- 10 % | 60 |
| Adhesive | 0.5-0.6 +/- 0.1 (3) | 13-15 |
| Liner | 3.0 +/- 10% | 76 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 50 | 550 |
| Acrylic | 44 | 484 |
| Glass | 47 | 517 |
| Polypropylene | 13 | 143 |
| Acrylic | 44 | 484 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | 620 | ASTM D 2979 |
| Expected Exterior Life | Indoor use only | |
| Additional Information | ||
| Service Temperature | -40ºF to 176ºF (-40ºC to 80ºC) | |
| Minimum Application Temperature | 32°F (0°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Letterpress - UV, Screen - UV, Flexographic - Water, Flexographic - UV |
| Surface Type | Styrene, HSE Plastic, LSE Plastic, Paint, PET, Polypropylene, PVC, HDPE |
| Surface Treatment | Flame Treat, Mold Release Agent, Corona Treat |
| Surface Texture | Smooth, Rough |
| Surface Profile | Concave, Convex, Flat, Flexible, Recess, Rigid, Compound Curve |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
