FLX056886
Flexcon® DrumCal™ 51932
2.3 Mil Topcoated White Polypropylene, Permanent Adhesive, Roll-Form Liner - BS 5609 Compliant
Request informationBenefits
- BS 5609 Section 2 compliant (salt water immersion)
- BS 5609 Section 3 compliant with a variety of thermal transfer ribbons
Contact: +1 508 885 8200
Features
- 2.3 mil BBP free white polypropylene film
- Topcoated surface optimizes printability with thermal transfer resin, UV inkjet, flexographic, rotary screen, rotary letterpress and hot stamping
- General purpose permanent adhesive bonds well to painted steel, fiber and plastic drums
- Backed with a 50 lb. bleached kraft release liner made from up to 30% post-consumer waste, ideal for roll form converting
- Liner is remoisturized for better stability and layflat
Additional Details
Pertaining to BBP Free: None of the RoHS, RoHS 2015, REACH, CPSIA and California Prop 65 substances are knowingly used or intentionally added during the manufacturing process.
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 6.65 | |
| Film | 2.3 +/- 10% | 58 |
| Adhesive | 0.8-0.9 +/- 0.1 (3) | 20-23 |
| Liner | 3.1 +/- 10% | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No Shrinkage Observed |
| TD |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Acrylic | 49 | 539 |
| Stainless Steel | 39 | 429 |
| ABS | 64 | 704 |
| Polypropylene | 18 | 198 |
| Aluminum | 63 | 693 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | 650 | ASTM D 2979 |
| Expected Exterior Life | One year | |
| Additional Information | ||
| Service Temperature | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 32°F (0°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | British Standard - Drum Label |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Inkjet - UV Narrow Format, Screen - UV, Screen - Solvent, Flexographic - UV, Inkjet - UV Wide Format, Flexographic - Solvent |
| Surface Type | Glass, HDPE, Melamine (Formica), Metal, Paint, PET, Polypropylene, Styrene, Closed-Cell Foam, Fiberglass, Foamboard, Ceramic |
| Surface Treatment | Dust, Wax, Dirt |
| Surface Texture | Smooth, Rough |
| Surface Profile | Concave, Convex, Flat, Rigid |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
