FLX056662
Flexcon® MedFlex® Overlam OMMCS100P - 1 MIL MATTE CLR PET, PERM ADH, PET LNR, UL REC
1 mil Matte Clear Polyester Overlaminate for Medical Device Labeling
Request informationBenefits
CUL Recognized, L- Adhesives, UL Recognized
Contact: +1 508 885 8200
Features
- 1.0 mil matte clear overlaminating polyester resists temperature extremes, abrasion and chemical exposure and provides excellent clarity and label protection while reducing glare
- Overlaminate provides added protection when MedFlex® Plus polyesters are printed with other unverified print methods, inks, or ribbons
- Permanent solvent-based acrylic biocompatible pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass without lifting
- Removable liner exposes adhesive to apply to your film/components
- 1 mil ultra smooth clear polyester release liner ensures optimum clarity
Additional Details
Please Note: MedFlex® Overlam is not intended for direct skin contact nor for implantable devices. For direct skin contact applications, please contact Flexcon at 508.885.8296 for information on our Flexcon® DermaFlex™ product line. “Fit-for-use” testing is recommended under actual application conditions.
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 2.75 | |
| Film | 1.0 +/- 10% | 25 |
| Adhesive | 0.9-1.0 +/- 0.1 | 23-25 +/- 3 |
| Liner | 1.0 +/- 5 % | 25 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Acrylic | 61 | 671 |
| Glass | 43 | 473 |
| Polypropylene | 27 | 297 |
| Stainless Steel | 48 | 528 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 25 | ASTM 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 830 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Overlaminating |
| Product Agency | UL_UL Recognized, CUL_CUL Recognized |
| Color Family | Clear Matte |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | N/A |
| Surface Type | PVC, PET |
| Surface Treatment | Varnish, Ink |
| Surface Texture | N/A |
| Surface Profile | Convex, Flat, Recess, Concave, Single Curve |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
