FLX056169
Flexcon® FlexMark® WPAE
3.5 Mil White Opaque Vinyl, Permanent Adhesive, Air Egress Liner
Request informationContact: +1 508 885 8200
Features
- 3.5 mil white opaque vinyl provides excellent hiding power
- Excellent printability via UV and solvent screen, UV and solvent inkjet, UV offset, and latex
- High-performance permanent adhesive bonds well to ABS, acrylic, Formica®, aluminum, stainless steel, HDPE, painted metal, styrene, painted non-vinyl wallboard, glass and more
- Backed with a 90 lb. moisture stable polycoated layflat release air-egress liner ideal for roll-to-sheet or sheet-form converting
Additional Details
For Inkjet Printing: • Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming
Formica® is a registered trademark of the Diller Corp.
Technical Data
Physical Properties
Thickness (Mils [microns]) | Mils | Microns |
---|---|---|
Total Product | 11.6 | |
Film | 3.5 +/- 10% | 89 |
Adhesive | 0.9-1.0 +/- 10% | 23-25 +/- 3 |
Liner | 6.9 +/- 10% | 175 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Dimensional Stability (%) | Value |
---|---|
MD | 0.75 |
TD | 0.75 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
Ultimate Peel from | Average Oz/In | (N/m) |
---|---|---|
Stainless Steel | 70 | 770 |
Acrylic Powder Paint | 72 | 792 |
Glass | 64 | 704 |
Polypropylene | 24 | 264 |
ABS | 62 | 682 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
Additional Properties | Value | Test Method |
---|---|---|
Expected Shear (hours) | 15 | ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load) |
Tack (g) | 750 | ASTM D 2979 |
Expected Exterior Life | Two years | |
Additional Information | Flammability Contact Tech Service at 508-885-8263 | |
Service Temperature | -40°F to 176°F (-40°C to 80°C) | |
Minimum Application Temperature | 50°F (10°C) | |
Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
Title | Description |
---|---|
Adhesive | Permanent |
Product Agency | N/A |
Color Family | White |
Converting | Roll to Sheet |
Film Family | N/A |
Master Web Width | 54 |
Other Available Widths | N/A |
Print Technology | Screen - UV, Inkjet - HP Latex, Inkjet - Solvent, Offset - UV, Inkjet - UV Wide Format, Screen - Solvent |
Surface Type | Ceramic Tile (some), Flexible Magnet, HDPE, Melamine (Formica), Metal, Paint, Painted Wallboard, Polypropylene, Powder Coated Paint, Sintra, Styrene, Varnished Wood, Lumber/Wood, Glass, Ceramic |
Surface Treatment | Varnish, Non-vinyl Based Paint, Corona Treat |
Surface Texture | Smooth |
Surface Profile | Rigid, Flat |
Quick Ship
Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
---|---|---|---|---|---|---|---|---|---|---|
1024913 | Roll | 1 | Y | 54 | 150 | 3 | X | X | X | X |
1024914 | Roll | 1 | Y | 54 | 300 | 3 | X | X | - | - |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
