FLX056046
Flexcon® DPM® LSE™ PM 200 WHITE TC-716 L-778 PCR 50K/Q-8 (1.8-2.0)
Durable Goods and Equipment Labeling for Low-Energy Surfaces White Polyester - Roll Form
Request informationBenefits
- No surface preparation required before application.
- Topcoat is more universally printable than other thermal transfer printable products
- Greener general purpose pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass
Contact: +1 508 885 8200
Features
- CUL Recognized, L- Adhesives, UL Recognized
- 2.0 mil white gloss topcoated polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
- Printable via resin and wax/resin thermal transfer; UV & solvent screen; UV, solvent & water flexo; and UV inkjet
- High-performance modified acrylic pressure-sensitive adhesive is the most aggressive adhesive for low surface energy plastics
- Permanently bonds to a variety of low surface energy plastics, painted metal, powder coated paint, polycarbonate, and fiberglass
- Adhesive eliminates the need to prime or flame treat the surface of TPO plastics
- Backed with a 50 lb. semi-bleached kraft release liner that is Quilon®* coated
*Quilon® is a registered trademark of Zaclon, LLC.
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 7.37 | |
| Film | 2.0 +/- 10% | 51 |
| Adhesive | 1.8-2.0 +/- 0.1 (3) | 45-50 |
| Liner | 3.1 +/- 10% | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No Shrinkage Observed |
| TD |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Acrylic Powder Paint | 119 | 1309 |
| Stainless Steel | 128 | 1408 |
| Epoxy KF4 | 94 | 1034 |
| Polypropylene | 63 | 693 |
| Epoxy Powder Paint | 123 | 1353 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | 900 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 32°F (0°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | CUL_CUL Recognized, UL_UL Recognized |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Screen - Solvent, Flexographic - UV, Hot Stamping, Flexographic - Solvent, Inkjet - UV Narrow Format, Screen - UV, Flexographic - Water, Laser - Roll Form |
| Surface Type | HDPE, HSE Plastic, Fiberglass, Glass, LSE Plastic, Melamine (Formica), Metal, Paint, Paper/Fiber, PET, Polycarbonate, Polyester Fiber, Polypropylene, Powder Coated Paint, PVC, TPO Plastic, Ceramic |
| Surface Treatment | N/A |
| Surface Texture | Smooth, Frosted, Rough, Extra Rough |
| Surface Profile | Rigid, Single Curve, Flat, Flexible, Concave |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
