FLX000546
Flexcon® FlexMount® Select™ DF051521
Graphic Mounting Film: Half Mil Clear Permanent/Permanent Adhesive Roll Liner
Request informationBenefits
- Excellent adhesion to a wide variety of smooth surfaces
- Resistant to cold flow and ooze
Contact: +1 508 885 8200
Features
- 0.5 mil double-faced clear polyester carrier film
- Excellent adhesion to a wide variety of smooth surfaces, including painted and unpainted metals and high- and low-surface energy plastics
- Adhesive has high peel and high shear characteristics resistant to cold flow and ooze
- Suitable for a wide range of temperature conditions
- Backed with an 80 lb. double-faced release liner
- Ideal for roll-form and roll-to-sheet converting
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 7.98 | |
| Film | 0.5 +/- 10% | 13 |
| Adhesive | 1.0-1.1 +/- 0.1 (3) | 25-28 |
| Adhesive 2 | 1.0-1.1 +/- 0.1 (3) | 25-28 |
| Liner | 5.6 +/- 10% | 142 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Test Method:
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Acrylic | 63 | 693 |
| Glass | 45 | 495 |
| Polypropylene | 13 | 143 |
| Stainless Steel | 50 | 550 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | 780 | ASTM D 2979 |
| Expected Exterior Life | Depends on substrate | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | Clear |
| Converting | Roll to Sheet |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | N/A |
| Surface Type | Paper/Fiber, LSE Plastic, Foamboard, HSE Plastic |
| Surface Treatment | Ink |
| Surface Texture | Smooth |
| Surface Profile | Flexible, Rigid, Flat |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
