FLX054552
2.0 Mil Retroreflective White Polyester, Permanent Adhesive, Roll-Form Liner
Contact: +1 508 885 8200
For reflectivity data, please click here.
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Film | 4.0 +/-15% | 102 |
| Adhesive | 1.0-1.1 +/- 10% | 25 - 28 |
| Liner | 3.1 +/- 10% | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.5 |
| TD | 0.5 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | Film destructs during adhesion | |
| Acrylic | Film destructs during adhesion | |
| Glass | Film destructs during adhesion | |
| Polypropylene | 15 | 165 |
Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear | 25 | ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load) |
| Tack | 660 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 48 |
| Other Available Widths | N/A |
| Print Technology | Flexographic - UV, Screen - UV, Screen - Solvent, Flexographic - Solvent |
| Surface Type | HSE Plastic, Metal, HDPE, Glass |
| Surface Treatment | Dust, Dirt |
| Surface Texture | Smooth, Rough |
| Surface Profile | Single Curve, Flat |
Units of Retroreflectivity Measurement - RA
Performance values for retroreflective sheeting are an expression of the ability of that material to retroreflect light at a particular set of observation and entrance angles. The number given tells how much light is retroreflected at that set of angles for a given unit of light falling on a given area of the material. Technically, it is termed the “Coefficient of Retroreflection,” designated by the symbol RA, a/k/a retroreflectivity. The technical meaning of the factors comprising retroreflectivity are candela per incident lux per square meter, often abbreviated to “cd/lx/ m2.” The important concept to understand, however, is that the RA is a ratio. It does not tell how bright the sheeting will be on a given object. Rather, it is simply its ability to return light to the source at that particular set of observation and entrance angles.
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.