FLX000377
DPM® PW White Polyester Hi-Performance Adhesive Roll Liner
Topcoated white polyester film coated with a permanent pressure sensitive acrylic adhesive backed with a semi-bleached kraft liner.
Request informationBenefits
- This product is UL recognized.
- Adhesive bonds well to base film substrates
- High shear and high peel adhesive resists cold flow and oozing
- View DPM® PW Yellow Card
Contact: +1 508 885 8200
Features
PM 200 WHITE TC-348 L-344 SPEC 50K-8
- 2.0 mil white gloss polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
- Topcoat is specifically designed for digital printing with HP Indigo inks and ensures excellent ink receptivity for sharp vibrant image quality
- Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass
- Backed with a 50 lb. bleached kraft release liner ideal for roll-form converting
- Liner is suitable for optical sensing on most thermal transfer printers
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 6.58 | |
| Film | 2.0 +/- 10 % | 51 |
| Adhesive | 0.9-1.0 +/- 0.1 | 23-23 +/- 3 |
| Liner | 3.1 +/- 10 % | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 55 | 605 |
| Acrylic | 77 | 847 |
| Glass | 68 | 748 |
| Polypropylene | 15 | 165 |
Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 30 | ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 1030 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | CSA_CSA Acceptance, UL_UL Recognized, UL_UL PGJI2 Recognized Printed w/Jetrion 4000 Series, CUL_CUL Recognized |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Letterpress - UV, Offset - UV, Flexographic - UV, Flexographic - Water, Flexographic - Solvent |
| Surface Type | Ceramic, Paper/Fiber, Asphalt, Glass, Unsealed Concrete, Paint, Powder Coated Paint, Metal, Fiberglass, Polycarbonate, Rubber, LSE Plastic, HSE Plastic |
| Surface Treatment | Condensation, Corona Treat, Flame Treat, Frost, Varnish, Ink, Moisture, Oil, Silicone, Dirt, Mold Release Agent, Dust, Slip Agent |
| Surface Texture | Frosted, Smooth, Rough |
| Surface Profile | Convex, Recess, Concave, Flat, Single Curve |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
