FLX000376
DPM® PWSRTS 2 Mil Printable White PET High-Performance Adhesive for Rough/Textured Surfaces Sheet Liner
PM 200 White TC-348 L-606 90 PFW (1.9-2.1)
Request informationBenefits
- CSA Acceptance, CUL Recognized, L- Adhesives, UL Recognized
Contact: +1 508 885 8200
Features
- Permanent acrylic pressure-sensitive adhesive with a heavier coat weight offers high initial tack, high shear, and high ultimate bond to a wide variety of oily and rough textured surfaces, including low-surface energy plastics and painted metal
- Adhesive offers high initial tack, high shear, and high ultimate bond to a wide variety of rough textured surfaces, including low-surface energy plastics and painted metal
- 90 lb. moisture stable polycoated layflat release liner ideal for sheet and roll-to-sheet converting
- Ideal for sheet-form converting
- Backed on both sides with a 90 lb. polycoated layflat release liner
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 11.28 | |
| Film | 2.0 +/- 10 % | 51 |
| Adhesive | 1.9-2.1 +/- 0.1 | 48-53 +/- 3 |
| Liner | 6.9 +/- 10 % | 175 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 104 | 1144 |
| Acrylic | 112 | 1232 |
| Glass | 118 | 1298 |
| Polypropylene | 22 | 242 |
Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 100 | ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 1520 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | CUL_CUL Recognized, UL_UL Recognized, CSA_CSA Acceptance |
| Color Family | White |
| Converting | Sheet Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Screen - Solvent, Screen - UV, Flexographic - UV, Flexographic - Water, Flexographic - Solvent |
| Surface Type | Asphalt, Fiberglass, Glass, Lumber/Wood, Unsealed Concrete, LSE Plastic, Metal, HSE Plastic, Powder Coated Paint, Paint, Polycarbonate |
| Surface Treatment | Ink, Mold Release Agent, Varnish, Dirt, Dust, Oil |
| Surface Texture | Extra Rough, Frosted, Smooth, Rough |
| Surface Profile | Convex, Single Curve, Concave, Recess, Flat |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
