FLX000306

Flexcon® DPM® Flex White

Durable Goods and Equipment Labeling Flexible White Vinyl - Roll Form

Request information
Home Technical Data and Details Availability

Benefits

  • In most cases, corona treatment is not required
  • Adhesive bonds well to base film substrates
  • Cosistent surface smoothness, excellent dimensional stability, and conformability

Click to view PDF

Contact: +1 508 885 8200

Features

  • CSA Acceptance, L- Adhesives, UL PGJI2 Recognized Printed w/Jetrion 4000 Series, UL Recognized
  • 3.5 mil double-faced flexible white vinyl 
  • Print-receptive 4.0 mil white flexible vinyl provides consistent surface smoothness, excellent dimensional stability, and conformability
  • Printable via resin and wax/resin thermal transfer, UV and solvent screen, UV, solvent & water flexo, laser (toner); and narrow-format UV inkjet
  • Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass
  • High shear and high peel adhesive resists cold flow and oozing
  • Backed with a 50 lb. bleached Kraft release liner ideal for roll-form converting
  • Liner is suitable for optical sensing on most thermal transfer printers

Additional Details

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Total Product 7.9
Film 3.5 +/- 10%89
Adhesive0.9-1.0 +/- 0.123-25 +/- 3
Liner3.1 +/- 10%79

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD 0.75
TD 0.75

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel1011111
Acrylic69759
Glass64704
Polypropylene24264

Test Method: ASTM D 903 (Modified for 72 hr. dwell time)

Additional PropertiesValueTest Method
Expected Shear (hours)15ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack (g)750ASTM D 2979
Expected Exterior LifeFive years based on 2000 hrs Xenon Arc testing
Additional Information
Service Temperature -40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature 50°F (10°C
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyCSA_CSA Acceptance, UL_UL Recognized, UL_UL PGJI2 Recognized Printed w/Jetrion 4000 Series
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyLetterpress - UV, Offset - UV, Flexographic - UV, Flexographic - Water, Flexographic - Solvent
Surface TypeRubber, Ceramic, Lumber/Wood, Unsealed Concrete, Asphalt, Glass, HSE Plastic, Paint, Metal, Fiberglass, Powder Coated Paint, LSE Plastic, Flexible Magnet, Polycarbonate
Surface TreatmentCondensation, Frost, Moisture, Oil, Other, Silicone, Stain Resistant, Flame Treat, Dust, Varnish, Dirt, Ink, Corona Treat, Mold Release Agent, Slip Agent
Surface TextureFrosted, Rough, Smooth
Surface ProfileCompound Curve, Flexible, Recess, Rigid, Single Curve, Convex, Concave, Flat

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.

contact