FLX029186

Flexcon® SA6102 LR

Moderate tack, high-performance, permanent silicone pressure-sensitive adhesive

Request information
Home Technical Data and Details Availability

Benefits

  • Supports applications exposed to extreme heat without compromising performance
  • Exceptional noise and vibration damping

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.0 mil engineering grade, high-performance permanent silicone adhesive
  • Excellent adhesion to metals, low-surface-energy plastics, silicone foam, and silicone rubber
  • Moderate tack with good quick-stick capabilities
  • Withstands extremely high and low temperatures
  • Short-term exposure up to 800°F (427°C) - less than 1 hour

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Total Product 6.95
Film 2.0 +/- 10 %51
Adhesive1.9-2.1 +/- 0.148-53 +/- 3
Liner3 +/- 10 %76

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Test Method:

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel73 Laminated to 2.0 mil clear803 Laminated to 2.0 mil clear
Acrylic75 Laminated to 2.0 mil clear825 Laminated to 2.0 mil clear
Glass80 Laminated to 2.0 mil clear880 Laminated to 2.0 mil clear
Polypropylene67 Laminated to 2.0 mil clear737 Laminated to 2.0 mil clear
Stainless Steel54 Laminated to 2.0 mil clear594 Laminated to 2.0 mil clear

Test Method: ASTM D 3330 (Modified for dwell time) - 180 degree angle 12"/minute

Additional PropertiesValueTest Method
Expected Shear (hours)80 Laminated to 2.0 mil clear polyester, 20 Laminated to 2.0 mil aluminum foilASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack (g)1180 Laminated to 2.0 mil clear polyester, 1000 Laminated to 2.0 m aluminum foilASTM D 2979
Expected Exterior LifeDepends on substrates, adhesive is suitable for outdoor use
Additional Information
Service Temperature -300°F to 500°F (-185°C to 260°C), Short term exposure temperature 800°F (427°C) for <1 hr
Minimum Application Temperature 50°F (10°C)
Storage StabilityOne year stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyN/A
ConvertingRoll Form
Film FamilyN/A
Master Web Width54
Other Available WidthsN/A
Print TechnologyN/A
Surface TypeLSE Plastic, Rubber, Silicone, Metal
Surface TreatmentN/A
Surface TextureN/A
Surface ProfileN/A

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.

contact