FLX000279

Flexcon® Classics Plus® 20092

2.0 Mil Clear Polyester, Permanent Adhesive Film Liner

Request information
Home Technical Data and Details Availability

Benefits

  • Film provides excellent resistance to abrasion, humidity, chemicals and solvents to protect the underlying graphics from harsh environmental conditions
  • UL recognized under UL 969 – UL File No. PGGU2.MH10170 Marking and Labeling System Materials - Component
  • View Flexcon® Classics Plus® 20092 Yellow Card

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.0 mil clear polyester offers excellent clarity
  • Permanent pressure-sensitive adhesive bonds well to printed base film surface
  • Adhesive exhibits good clarity and cold-flow properties, resulting in good wet-out performance
  • Backed with an ultra smooth clear polyester release liner

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Total Product 3.83
Film 2.0 +/- 10%51
Adhesive0.9-1.0 +/- 0.123-25 +/- 3
Liner1.0 +/- 5%25

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwelltime on aluminum panel then 24hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel45495
Acrylic52572
Glass36396
Polypropylene14154

Test Method: ASTM D 903 (Modified for 72 hourdwell time)

Additional PropertiesValueTest Method
Expected Shear (hours)100+ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack (g)630ASTM D 2979
Expected Exterior LifeTwo years
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesiveOverlaminating
Product AgencyUL_UL Recognized, CUL_CUL Recognized
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyN/A
Surface TypePaper/Fiber, Metal, Paint, HSE Plastic
Surface TreatmentVarnish, Ink
Surface TextureN/A
Surface ProfileFlat, Concave, Convex, Flexible, Recess, Single Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.

contact