FLX027516
Recommendations: Printing/converting trials are highly recommended prior to full scale manufacturing.
Contact: +1 508 885 8200
Value | Thickness (Mils[microns]) |
---|---|
Film | 2.0 (51) +/- 10% |
Adhesive | 1.0-1.1 (25-28) +/- 0.1 (3) |
Liner | 3.1 (79) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Value | Dimensional Stability (%) |
---|---|
MD | 0.5 |
TD | 0.5 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Ultimate Peel from | Average Oz/In | (N/m) |
---|---|---|
ABS | Film rips | Film rips |
Acrylic | Film rips | Film rips |
Acrylic Powder Paint | Film rips | Film rips |
Aluminum | Film rips | Film rips |
Epoxy Powder Paint | Film rips | Film rips |
Glass | Film rips | Film rips |
HDPE | Film rips | Film rips |
Painted Metal | Film rips | Film rips |
Polyester Powder Paint | Film rips | Film rips |
Polypropylene | Film rips | Film rips |
Polyurethane Powder Paint | Film rips | Film rips |
Stainless Steel | Film rips | Film rips |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
Property | Value | Test Method |
---|---|---|
Expected Shear | Room Temp (hours): 5+ (Film rips) | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
Tack (gm/sq cm) | 630 | ASTM D 2979 |
Expected Exterior Life | Indoor use only | |
Service Temperature Range | -40°F to 176°F (-40°C to 80°C) | |
Minimum Application Temperature | 35°F (2°C) | |
Storage Stability | Two years when stored at 70°F (21°C) and 50% relative humidity |
Title | Description |
---|---|
Adhesive | Permanent |
Product Agency | N/A |
Color Family | White |
Converting | Roll Form |
Double Face | 0 |
Film Family | Polyethylene |
Master Web Width | 54.000 |
Other Available Widths | N/A |
Print Technology | Solvent Flexo,Solvent Screen,UV Screen,Water Flexo,Thermal Transfer |
Quilon | 0 |
Remoist | 0 |
Surface Type | Ceramic,Glass,HSE Plastic,LSE Plastic,Metal,Polycarbonate,Powder Coated Paint,Rubber |
Surface Treatment | Corona Treat,Dirt,Dust,Mold Release Agent,Pressure Treated,Slip Agent |
Surface Texture | Rough,Smooth |
Surface Profile | Single Curve,Compound Curve,Concave,Convex,Flat,Flexible,Recess,Rigid |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
---|---|---|---|---|---|---|---|---|---|---|
T232040 | R | N/A | N | 54 | 0 | 6 | X | - | - | - |
Please log in to view sales figures.
All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
Modified on: