FLX025166

Flexcon® FlexMark® Floor Art™ 4652 4 Mil White Vinyl Removable Adhesive Layflat Liner

Indoor Floor Advertising White Base Film

Request information
Home Technical Data and Details Availability

Benefits

  • UL Recognized
  • Excellent printability with UV and solvent screen, UV and solvent inkjet, UV offset inks, and latex 
  • Excellent stay flat release liner properties for printing and converting

Click to view PDF

Contact: +1 508 885 8200

Features

  • 3.5 mil flexible white vinyl provides durability for ease of installation and removal
  • Printable via UV and solvent screen. Please test for ink adhesion with your specific ink chemistry
  • 4 mil flexible white vinyl resists tearing and abrasion
  • Removable pressure-sensitive acrylic adhesive bonds well to waxed and non-waxed commercial PVC tile, certain ceramic tile, sealed concrete, and linoleum
  •  94 lb. premium grade moisture stable polycoated layflat release liner provides excellent stay flat release liner properties for printing and converting
  • Ideal for sheetfed offset printing

Additional Details

FlexMark® Floor Art™ 4652 with Flexcon® FlexMark® OV6601, FlexMark® OV6602, or FlexMark® OV6603BN has been investigated by Underwriters Laboratories, Inc., and when used as a system, is in accordance with UL 410, the Standard for Floor Surfaces, for Floor-Graphic Materials (FGM).

Please refer to Flexcon’s Warranty & Limited Remedy Policy for Graphic Advertising for Floors and Indoor Carpets, and Application and Removal Instructions. Nothing contained herein shall expand the Floors and Indoor Carpets Limited Warranty or otherwise be construed as a warranty or guarantee. For Inkjet Printing: • Typical max. ink limit = 250%; • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Total Product 10.85
Film 3.4 +/- 10%86
Adhesive0.6-0.7 +/- 0.115 - 18
Liner6.9 +/- 10%175

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD 0.50
TD 0.50

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Ceramic Tile666
Linoleum999
PVC Tile30330
Sealed Concrete222

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear (hours)10ASTM D 3654 1 hr. dwell
Tack (g)320ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesiveApplication Specific
Product AgencyN/A
Color FamilyWhite
ConvertingRoll to Sheet
Film FamilyN/A
Master Web Width54
Other Available WidthsN/A
Print TechnologyInkjet - HP Latex, Inkjet - UV Wide Format, Screen - Solvent, Screen - UV, Inkjet - Solvent, Offset - UV
Surface TypeCeramic Tile (some), Sealed Concrete, PVC Tile, Linoleum
Surface TreatmentPolish, Varnish, Wax, Other
Surface TextureSmooth
Surface ProfileFlat

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.

contact