FLX022740
FlexMount® DFM 200 White V-344 100 POLY H-9 V-606 200 POLY SC-6 (1.9-2.1)
Benefits
- Permanent acrylic adhesive offers medium tack, high shear and excellent adhesion to a variety of metal and plastic surfaces, including polypropylene, polyethylene, PORON® and Kushon® cellular rubber products
Contact: +1 508 885 8200
Features
- Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, moderately rough surfaces. polycarbonate and fiberglass
- High-peel permanent acrylic adhesive resists cold flow and ooze
- Performance, aggressive, permanent pressure-sensitive adhesive bonds well to a variety of surfaces
- Ultra-smooth polyester release liner provides ultimate smoothness and flow-out of adhesive on the overlaminating film
- Adhesive offers high initial tack, high shear, and high ultimate bond to a wide variety of rough textured surfaces, including low-surface energy plastics and painted metal
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 7.97 | |
| Film | 2.0 +/- 10 | 51 |
| Adhesive | V-606: 1.9-2.1 +/- 0.1 | V606: 48-53 +/- 3 |
| Adhesive 2 | V344: 1.0-1.1 +/- 0.1 | V344: 25-28 +/- 3 |
| Liner | 200 POLY SC-6 Liner: 2.0 +/- 1 | 200 POLY SC-6 Liner: 51 |
| Liner 2 | 100 POLY H-9 Liner: 1.0 +/- 1 | 100 POLY H-9 Liner: 25 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD | No shrinkage observed |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | V-344: 55 V-606: 104 | V-344: 605 V-606: 1144 |
| Acrylic | V-344: 77 V-606: 112 | V-344: 847 V-606: 1232 |
| Glass | V-344: 68 V-606: 118 | V-344: 748 V-606: 1298 |
| Polypropylene | V-344: 15 V-606: 22 | V-344: 165 V-606: 242 |
Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | V-344: 30 V-606: 100 | ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | V-344: 1030 V-606: 1520 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | N/A |
| Product Agency | N/A |
| Color Family | White |
| Converting | N/A |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | N/A |
| Surface Type | N/A |
| Surface Treatment | N/A |
| Surface Texture | N/A |
| Surface Profile | N/A |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
