FLX021761
Flexcon® ThermlFilm Select® 21980
2.0 Mil Gloss Topcoated White Polyester, Permanent Adhesive, Roll-Form Liner (1.45-1.55)
Request informationBenefits
- Adhesive exhibits exceptional performance on textured and uneven surfaces
- Quilon®* coated to prevent label pick-off
- UL recognized under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component
- CUL recognized under UL File No. PGJI8.MH16635 - Printing Materials Certified for Canada - Component - under CAN/CSA standard C22.2, No. 0.15
- CSA accepted under CSA File No. 99214
Contact: +1 508 885 8200
Features
- 2.0 mil gloss topcoated white polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
- Topcoat resists smudging and abrasion when printed with resin and wax/resin thermal transfer ribbons
- Topcoat is compatible with color and black resin and wax/resin thermal transfer ribbons (we recommend evaluating the intended ribbon and ink system for compatibility with the product under the application conditions)
- Adhesive offers high initial tack, high shear, and high ultimate bond to a wide variety of rough textured surfaces, including low-surface energy plastics and painted metal
- Backed with a 50 lb. semi-bleached kraft release liner that is Quilon®* coated
Additional Details
*Quilon® is a registered trademark of Zaclon LLC
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 7.08 | |
| Film | 2.0 +/- 10 % | 51 |
| Adhesive | 1.4-1.5 +/- 0.1 | 36-38 +/- 3 |
| Liner | 3.1 +/- 10 % | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD | No shrinkage observed |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 90 | 990 |
| Acrylic | 94 | 1034 |
| Glass | 104 | 1144 |
| Polypropylene | 29 | 319 |
| ABS | 87 | 957 |
Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 75 | ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 1680 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | CSA_CSA Acceptance, CUL_CUL Recognized, UL_UL Recognized |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 61 |
| Other Available Widths | 60, 60 |
| Print Technology | Screen - Solvent, Flexographic - Solvent |
| Surface Type | Rubber, HSE Plastic, Metal, Fiberglass, Glass, Unsealed Concrete, Ceramic, Paint, Polycarbonate, Powder Coated Paint, Asphalt |
| Surface Treatment | Slip Agent, Varnish, Flame Treat, Ink, Dust, Dirt, Corona Treat |
| Surface Texture | Smooth, Rough |
| Surface Profile | Recess, Single Curve, Flat, Convex, Concave |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
