FLX000214
FlexMark® DA 200 Clear V-88 Special 50K/Q-8
Clear diacetate film for destructible applications
Request informationBenefits
- Aggressive permanent rubber based adhesive offers excellent adhesion to a wide variety of surfaces
Contact: +1 508 885 8200
Features
- 2.0 mil clear diacetate film for destructible applications
- Backed with a 50 lb. semi-bleached kraft release liner that is Quilon®* coated
Additional Details
*Quilon® is a registered trademark of Zaclon, LLC.
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 6.25 | |
| Film | 2.0 +/- 10 % | 51 |
| Adhesive | 1.0-1.1 +/- 0.1 | 25-28 +/- 3 |
| Liner | 3.2 +/- 10 % | 81 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.5 |
| TD | 0.5 |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | Film rips during adhesion test | |
| Acrylic | Film rips during adhesion test | |
| Glass | Film rips during adhesion test | |
| Polypropylene | Film rips during adhesion test |
Test Method: ASTM D 903 (Modified for 72 hr. dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 100 | ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 1340 | ASTM D 2979 |
| Expected Exterior Life | Indoor use only | |
| Additional Information | ||
| Service Temperature | -40°F to 200°F (-40°C to 93°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | Clear |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 52 |
| Other Available Widths | N/A |
| Print Technology | Screen - UV, Flexographic - Solvent, Screen - Solvent, Flexographic - UV |
| Surface Type | Paper/Fiber, HSE Plastic, LSE Plastic |
| Surface Treatment | Dirt, Dust, Flame Treat, Varnish, Corona Treat |
| Surface Texture | Rough, Smooth |
| Surface Profile | Compound Curve, Convex, Flat, Flexible, Recess, Rigid, Single Curve, Concave |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
