FLX019120
Flexcon® WindowDeco™ 6541
4.0 Mil Clear Vinyl, Removable Adhesive, Sheet Liner
Request informationBenefits
- For a conventional offset printable alternative, see WindowDeco™ 6541T
Contact: +1 508 885 8200
Features
- 4.0 mil hard clear vinyl provides durability for ease of installation and removal
- Printable via UV offset, Solvent and UV Screen, Solvent and UV Inkjet, and Latex
- Low tack, removable pressure-sensitive adhesive bonds well to smooth non-tinted glass interior and exterior surfaces over a wide range of temperatures while removing cleanly
- Adhesive adheres well to an exterior glass surface over a wide range of temperatures
- 90 lb. moisture stable polycoated layflat release liner ideal for sheet and roll-to-sheet converting
- Excellent layflat release liner properties for printing and converting
Additional Details
Please refer to Flexcon's Window Graphics Installation Guide for more information. Caution: When using the wet application method, this product may haze. Under normal temperature and humidity conditions, the hazing usually clears within 48 hours.
For Inkjet Printing:
• Typical max. ink limit = 250%
• When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 11.65 | |
| Film | 4.0 +/- 10% | 102 |
| Adhesive | 0.8-0.9 +/- 0.1 | 20-23 +/- 3 |
| Liner | 6.9 +/- 10% | 175 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.5 |
| TD | 0.5 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Non-tinted Glass | 7 | 77 |
Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | 100 | ASTM D 2979 |
| Expected Exterior Life | One year | |
| Additional Information | ||
| Service Temperature | -20°F to 176°F (-29°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years when stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Removable |
| Product Agency | N/A |
| Color Family | Clear |
| Converting | Sheet Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | 54, 54 |
| Print Technology | Inkjet - HP Latex, Inkjet - UV Wide Format, Offset - UV, Screen - UV, Screen - Solvent, Inkjet - Solvent |
| Surface Type | Glass |
| Surface Treatment | N/A |
| Surface Texture | Smooth |
| Surface Profile | Rigid, Flat |
Quick Ship
| Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
|---|---|---|---|---|---|---|---|---|---|---|
| 1032537 | Roll | 1 | Y | 54 | 150 | 3 | X | X | X | X |
| 1032538 | Roll | 1 | Y | 54 | 300 | 3 | X | X | X | X |
| 1032541 | Roll | 1 | Y | 60 | 150 | 3 | X | - | - | - |
| 1035536 | Sheet | 250 | Y | 20 | 27 | X | X | - | - |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
