FLX019110
Flexcon® FlexMark® 6121 8 MIL BLACK/WHITE GRIPPER LAMINATE ADHESIVE COATED WHITE SIDE
Counter Mats: Non-Adhesive "Gripper"
Request informationBenefits
Unique "gripper" backing material anchors without the use of foam, rubber or adhesive to create ultra-thin counter mats
Contact: +1 508 885 8200
Features
- Unique 8.1 mil polypropylene composite film combines a white top surface and a black non-slip gripping underside
- White surface improves the impact of the printed graphics and reduces printing costs by eliminating the need to print white
- Acrylic adhesive offers high initial tack and high ultimate bond to a wide variety of rough textured surfaces, including low surface energy plastics and painted metal
- High-performance adhesive system is designed to adhere to smooth surfaces as well as rough-textured surfaces
- Adhesive bonds well to PVC, Varnished Wood, Lumber/Wood, Paint, and Ceramic
- Backed with a 42 lb. one side polycoated white kraft release liner that results in good adhesive clarity
Additional Details
Recommendations for Non-Adhesive Backed Printable Film & “Gripper”: • Ideal for flat, horizontal surface counter mats and other P-O-P displays that do not require use of adhesive, foam or rubber backing • Not designed for use on floors as floor mats • FlexMark® 6120 is designed to be laminated to FlexMark® 6121 (“Gripper”)
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 12.1 | |
| Film | 8.1 +/- 15% | 205 |
| Adhesive | 0.8-0.9 +/- 0.1 | 20-23 +/- 3 |
| Liner | 3.1 +/- 10% | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.75 |
| TD | 0.5 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|
Test Method:
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | ||
| Expected Exterior Life | Indoor use only | |
| Additional Information | ||
| Service Temperature | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | Black |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 54 |
| Other Available Widths | N/A |
| Print Technology | N/A |
| Surface Type | LSE Plastic |
| Surface Treatment | Ink, Varnish |
| Surface Texture | Smooth |
| Surface Profile | Rigid |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
