FLX000018
Flexcon® Classics Plus® SELECT™ 57285SL Ink Receptive Roll Form 1.5 MIL Gold #78 PET W/Adhesive
Novelty Stickers Gold Polyester Permanent - Roll Form
Request informationBenefits
- 50 lb. bleached kraft release liner offers good diecutability
Contact: +1 508 885 8200
Features
- 1.5 mil gold polyester film offers good durability and easy installation
- Ink-receptive surface is compatible with most standard flexographic inks. Please test for ink adhesion with your specific ink chemistry
- Permanent pressure-sensitive acrylic adhesive resists oozing and reduces adhesive build-up for ease of diecutting
- Adheres to a variety of surfaces including chrome-coated metal, chrome-coated plastic, glass, auto glass and painted plastic
- Roll-form liner is a semi-bleached kraft release liner for ease of converting and manual dispensing
Additional Details
Ask about FLEXcon's wide variety of colored vinyls, brilliant metallic polyesters and eye-catching holographic vinyls for bumper stickers
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 5.92 | |
| Film | 1.4 +/- 10% | 36 |
| Adhesive | 0.8-0.9 +/- 0.1 (3) | 20-23 |
| Liner | 3.1 +/- 10% | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No Shrinkage Observed |
| TD |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Auto Glass | 35 | 385 |
| Chrome-Coated Metal | 29 | 319 |
| Chrome-Coated Plastic | 34 | 374 |
| Glass | 30 | 330 |
| Painted Plastic | 38 | 418 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | ||
| Tack (g) | 340 | ASTM D 2979 |
| Expected Exterior Life | Two years (gold color fades under sunlight) | |
| Additional Information | Chemical Resistance Water Good, Gasoline Good, Basic Cleaners Excellent, Toluene Good, ASTM D 896(Modified for number of cycles and cycle time) | |
| Service Temperature | -40°F to 302°F (-40°F to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | Gold |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 54 |
| Other Available Widths | N/A |
| Print Technology | Flexographic - UV, Flexographic - Water, Flexographic - Solvent |
| Surface Type | HSE Plastic, Metal, Paint, LSE Plastic, Glass |
| Surface Treatment | Polish, Wax |
| Surface Texture | Smooth |
| Surface Profile | Rigid |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
