FLX016422
Recommendations for Non-Adhesive Backed Printable Film & “Gripper”:
• Ideal for flat, horizontal surface counter mats and other P-O-P displays that do not require use of adhesive, foam or rubber backing
• Not designed for use on floors as floor mats
• FlexMark® 6120 is designed to be laminated to FlexMark® 6121 (“Gripper”)
View How the System Works. * 212°F (100°C) for 30 mins.
† 212°F (100°C) for 30 mins.
Contact: +1 508 885 8200
Value | Thickness (Mils[microns]) |
---|---|
Film | 6.2 (157) +/- 15% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Value | Dimensional Stability (%) |
---|---|
MD | 4.0 +/- 1.5* |
TD | 4.0 +/- 1.5† |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Value | Elongation (%) |
---|---|
MD | 107 +/- 70 |
Test Method: ASTM D 882
Value | Tensile Strength (psi) |
---|---|
MD | 7,600 - 2,100 |
Test Method: ASTM D 882
Property | Value | Test Method |
---|---|---|
Expected Exterior Life | Indoor use only | |
Service Temperature Range | -40°F to 176°F (-40°C to 80°C) | |
Storage Stability | Six months for adhesive free film and two years for adhesive coated film stored at 70°F (21°C) and 50% relative humidity |
Title | Description |
---|---|
Adhesive | N/A |
Product Agency | N/A |
Color Family | Clear |
Converting | Sheet Form |
Double Face | 0 |
Film Family | Vinyl |
Master Web Width | 54.000 |
Other Available Widths | N/A |
Print Technology | UV Offset,Conventional Offset |
Quilon | 0 |
Remoist | 0 |
Surface Type | N/A |
Surface Treatment | N/A |
Surface Texture | N/A |
Surface Profile | N/A |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
Please log in to view sales figures.
All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
Modified on: