FLX000161

Flexcon® OptiFlex® PP 200 H Clear TC-332™ V-81 TracRite™ 120

Primary and Secondary Labeling Clear Polypropylene Rigid Container Labels Semi-Squeeze Container Labels

Home Technical Data and Details Availability

Benefits

  • Flexcon® TracRite™ 120 polyester release liner provides excellent on-press performance for tight-registration graphics, a good diecutting base and allows for high-speed dispensing
  • Film clarity is ideal for achieving the no-label-look on glass

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.0 mil clear polypropylene (BOPP) film offers excellent resistance to shrinkage, high temperature pasteurization, moisture, humidity and product contents
  • Excellent surface smoothness allows for optimum ink laydown
  • Topcoat optimizes printability with flexographic, rotary screen, rotary letterpress inks and hot stamping

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10 %51
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner1.2 +/- 10 %30

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel48528
Glass47517
Polypropylene13143
Acrylic42462

Test Method: ASTM D 903 (Modified for 72 hr dwell time)

Additional PropertiesValueTest Method
Expected Shear15ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load)
Tack740ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyOffset - UV, Letterpress - UV, Flexographic - Water, Flexographic - UV, Flexographic - Solvent, Screen - UV, Hot Stamping
Surface TypeGlass, PVC, HSE Plastic, HDPE, LSE Plastic, PET, Polypropylene, Paint, Metal
Surface TreatmentInk, Flame Treat, Mold Release Agent, Corona Treat
Surface TextureRough, Frosted, Smooth
Surface ProfileRigid, Compound Curve, Concave, Convex, Flat, Flexible, Recess

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.