FLX000159
Flexcon® OptiFlex® PP 230 H White TC-332™ V-81 TracRrite™ 120
Primary and Secondary Labeling White Polypropylene Rigid Container Labels Semi-Squeeze Container Labels
Request informationBenefits
- Flexcon® TracRite™ 120 polyester release liner provides excellent on-press performance for tight-registration graphics, a good diecutting base and allows for high-speed dispensing
Contact: +1 508 885 8200
Features
- 2.3 mil hard white polypropylene offers excellent resistance to shrinkage, moisture, humidity, and product contents
- Film conformability for rigid containers provides maximum label and graphic coverage
- Excellent surface smoothness allows for optimum ink laydown
- Topcoat optimizes printability with flexographic, rotary screen, rotary letterpress inks and hot stamping
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 4.47 | |
| Film | 2.3 +/- 10 % | 58 |
| Adhesive | 0.5-0.6 +/- 0.1 | 13-15 +/- 3 |
| Liner | 1.2 +/- 10 % | 30 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 53 | 583 |
| Acrylic | 46 | 506 |
| Glass | 47 | 517 |
| Polypropylene | 10 | 110 |
Test Method: ASTM D 903 (Modified for 72 hr. dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 15 | ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 710 | ASTM D 2979 |
| Expected Exterior Life | Indoor use only | |
| Additional Information | ||
| Service Temperature | -40°F to 212°F (-40°C to 100°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | White |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 76 |
| Other Available Widths | N/A |
| Print Technology | Letterpress - UV, Flexographic - Water, Flexographic - UV, Hot Stamping, Offset - UV, Screen - UV, Flexographic - Solvent |
| Surface Type | PVC, Glass, HSE Plastic, Metal, PET, HDPE, Polypropylene, LSE Plastic |
| Surface Treatment | Oil, Flame Treat, Mold Release Agent, Corona Treat |
| Surface Texture | Rough, Frosted, Smooth |
| Surface Profile | Compound Curve, Concave, Convex, Recess, Rigid, Flat |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
