FLX001278

Flexcon® FlexMark® DA 200 Clear V-23 150 Poly H-9

Tamper-Evident Materials for Security and Counterfeit Protection Clear Diacetate (Destructible)

Home Technical Data and Details Availability

Benefits

  • For Tamper-Evident Labeling including: Consumer Electronics or anywhere tamper evidence may be required.

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.0 mil clear diacetate film for destructible applications
  • Printable surface is compatible with most standard flexographic inks
  • Permanent acrylic pressure-sensitive adhesive bonds well to a variety of surfaces
  • Backed with an ultra-smooth clear polyester release liner
  • Release liner provides a good diecutting base and allows for high-speed dispensing

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10 %51
Adhesive 0.7-0.8 +/- 0.118-20 +/- 3
Liner1.4 +/- 10 %36

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel55605
Glass59649
Polypropylene222
Acrylic67737

Test Method: ASTM D 903 (Modified for 72 hr dwell time)

Additional PropertiesValueTest Method
Expected Shear30ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load)
Tack700ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesiveN/A
Product AgencyN/A
Color FamilyClear
ConvertingN/A
Film FamilyN/A
Master Web Width52
Other Available WidthsN/A
Print TechnologyN/A
Surface TypeN/A
Surface TreatmentN/A
Surface TextureN/A
Surface ProfileN/A

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.