FLX012547

Flexcon® ThermlFilm® PM 200 White TC-390 V-606 Spec 50K/Q-9 (1.4-1.5)

Automotive Engine Compartment Cover Label

Home Technical Data and Details Availability

Benefits

Topcoat resists smudging and abrasion when printed with resin and wax/resin thermal transfer ribbons

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.0 mil white gloss topcoated polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
  • Topcoat is compatible with color and black resin and wax/resin thermal transfer ribbons (we recommend evaluating the intended ribbon and ink system for compatibility with the product under the application conditions)
  • Permanent acrylic adhesive offers medium tack, high shear and excellent adhesion to a variety of metal and plastic surfaces, including polypropylene, polyethylene, PORON® and Kushon® cellular rubber products
  • Adhesive offers high initial tack, high shear, and high ultimate bond to a wide variety of rough textured surfaces, including low-surface energy plastics and painted metal
  • Backed with a 50lb. semi-bleached kraft release liner that is Quilon® coated†

Additional Details

*PORON® is a registered trademark of Rogers Corporation. Kushon® is a registered trademark of Griswold Products, LLC. 

†*Quilon® is a registered trademark of Zaclon, LLC.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10 %51
Adhesive 1.4-1.5 +/- 0.136-38 +/- 3
Liner3.1 +/- 10 %79

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel911001
Glass1271397
Polypropylene15165
Acrylic1131243

Test Method: ASTM D 903 (Modified for 72 hr dwell time)

Additional PropertiesValueTest Method
Expected Shear100b. 1 sq. in. surface
Tack1300ASTM D 2979
Expected Exterior LifeTwo years
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available Widths54
Print TechnologyScreen - Solvent
Surface TypeBronze, Ceramic, Copper, Glass, HDPE, HSE Plastic, Linoleum, LSE Plastic, Lumber/Wood, PET, Polycarbonate, Polypropylene, PVC Tile, Stainless Steel, Steel, Styrene, TPO Plastic, ABS Textured, Aluminum, ABS
Surface TreatmentN/A
Surface TextureSmooth, Rough
Surface ProfileFlexible, Rigid, Flat

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.