FLX012395
Flexcon® CompuCal® Excel™ 10442
1.0 Mil Matte Topcoated Clear Polyester Overlaminate, Permanent Adhesive, Poly Liner
Request informationBenefits
- Overlaminating polyester resists temperature extremes, abrasion and chemical exposure for maximum label protection
- UL recognized under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component
- CSA accepted under CSA File No. 99214
Contact: +1 508 885 8200
Features
- 1.0 mil matte topcoated clear overlaminating polyester provides excellent clarity and label protection
- This thin gauge film can also be used as a printable base film alternative to the standard 2.0 mil product
- Matte topcoated film designed for cross-technology printability via impact, laser, electron beam, wax, resin and wax/resin thermal transfer (we recommend evaluating the intended ribbon and ink system for compatibility with the product under the application conditions)
- Unique matte topcoat allows for greater than four times as many die revolutions before retooling compared with competing label materials
- Topcoat provides excellent resistance to chemicals, moisture, smudging and scratching
- Permanent pressure-sensitive acrylic adhesive bonds well to base film substrates, as well as low-surface energy plastics, metal and powder-coated paint
- Backed with an ultra smooth clear polyester release liner
Technical Data
Physical Properties
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Total Product | 3.2 | |
| Film | 1.1 +/- 10% | 28 |
| Adhesive | 0.8-0.9 +/- 0.1 | 20-23 +/- 3 |
| Liner | 1.0 +/- 5% | 25 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No shrinkage observed |
| TD |
Test Method: On Al panel at 160°F (71°C) for 24 hr.
Adhesion Properties
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 48 | 528 |
| Acrylic | 61 | 671 |
| Glass | 43 | 473 |
| Polypropylene | 27 | 297 |
Test Method: ASTM D 903 (Modified for 72 hr. dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear (hours) | 25 | ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
| Tack (g) | 830 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
Product Details
| Title | Description |
|---|---|
| Adhesive | Overlaminating |
| Product Agency | UL_UL Recognized, CSA_CSA Acceptance |
| Color Family | Clear |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | N/A |
| Print Technology | Flexographic - Solvent, Flexographic - Water, Flexographic - UV, Screen - Solvent, Letterpress - UV, Screen - UV, Laser - Roll Form |
| Surface Type | Fiberglass, Powder Coated Paint, Rubber, Ceramic, Metal, Paint, Polycarbonate, Unsealed Concrete, Glass, HSE Plastic, LSE Plastic, Asphalt |
| Surface Treatment | Ink, Condensation, Corona Treat, Dirt, Dust, Flame Treat, Silicone, Slip Agent, Varnish, Moisture, Mold Release Agent, Oil, Pressure Treated, Frost |
| Surface Texture | Smooth, Frosted, Rough |
| Surface Profile | Flat, Flexible, Recess, Rigid, Single Curve, Concave |
Product Performance and Suitability
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
