FLX012395

Flexcon® CompuCal® Excel™ 10442

1.0 Mil Matte Topcoated Clear Polyester Overlaminate, Permanent Adhesive, Poly Liner

Benefits

  • Overlaminating polyester resists temperature extremes, abrasion and chemical exposure for maximum label protection
  • UL recognized under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component
  • CSA accepted under CSA File No. 99214

Contact: +1 508 885 8200

Features

  • 1.0 mil matte topcoated clear overlaminating polyester provides excellent clarity and label protection
  • This thin gauge film can also be used as a printable base film alternative to the standard 2.0 mil product
  • Matte topcoated film designed for cross-technology printability via impact, laser, electron beam, wax, resin and wax/resin thermal transfer (we recommend evaluating the intended ribbon and ink system for compatibility with the product under the application conditions)
  • Unique matte topcoat allows for greater than four times as many die revolutions before retooling compared with competing label materials
  • Topcoat provides excellent resistance to chemicals, moisture, smudging and scratching
  • Permanent pressure-sensitive acrylic adhesive bonds well to base film substrates, as well as low-surface energy plastics, metal and powder-coated paint
  • Backed with an ultra smooth clear polyester release liner

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 1.1 +/- 10%28
Adhesive 0.8-0.9 +/- 0.120-23 +/- 3
Liner1.0 +/- 5%25

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel48528
Acrylic61671
Glass43473
Polypropylene27297

Test Method: ASTM D 903 (Modified for 72 hr. dwell time)

Additional PropertiesValueTest Method
Expected Shear25ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load)
Tack830ASTM D 2979
Expected Exterior LifeTwo years
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesiveOverlaminating
Product AgencyUL_UL Recognized, CSA_CSA Acceptance
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyFlexographic - Solvent, Flexographic - Water, Flexographic - UV, Screen - Solvent, Letterpress - UV, Screen - UV, Laser - Roll Form
Surface TypeFiberglass, Powder Coated Paint, Rubber, Ceramic, Metal, Paint, Polycarbonate, Unsealed Concrete, Glass, HSE Plastic, LSE Plastic, Asphalt
Surface TreatmentInk, Condensation, Corona Treat, Dirt, Dust, Flame Treat, Silicone, Slip Agent, Varnish, Moisture, Mold Release Agent, Oil, Pressure Treated, Frost
Surface TextureSmooth, Frosted, Rough
Surface ProfileFlat, Flexible, Recess, Rigid, Single Curve, Concave

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.