FLX011647

Flexcon® OptiFlex® Squeeze™ PE30433

Primary and Secondary Labeling White Polyethylene

Home Technical Data and Details Availability

Benefits

  • Backed with Flexcon® TracRite™ 120 polyester release liner for excellent on-press performance for tight registration graphics
  • Release liner provides a good diecutting base and allows for high-speed dispensing

Click to view PDF

Contact: +1 508 885 8200

Features

  • 3.0 mil white polyethylene offers superior film conformabilty for maximum label and graphic coverage
  • Polyethylene film offers good resistance to a variety of environments, including the shower where moisture and humidity are present
  • Print-receptive film provides uniform and consistent printability via rotary letterpress, rotary screen and flexography (FLEXcon recommends in-line corona treatment to enhance ink receptivity)
  • Permanent pressure-sensitive acrylic adhesive bonds well to low- and high-surface energy plastics, metal and paint without lifting, tunneling or flagging
  • Adhesive offers excellent tack, clarity and wet out characteristics

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 3.0 +/- 10%76
Adhesive 0.8-0.9 +/- 0.120-23 +/- 3
Liner1.2 +/- 5%30

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD 0.5
TD 0.5

Test Method: Applied Shrinkage: 24 hour dwelltime on aluminum panel then 24hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Corona Treated Polyethylene57627
Polyethylene28308
Polypropylene24264
PVC1021122
Styrene73803

Test Method: ASTM D 903 (Modified for 72 hr. dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack550ASTM D 2979
Expected Exterior LifeIndoor use only
Additional Information
Service Temperature -40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyLetterpress - UV, Offset - UV, Flexographic - UV
Surface TypeLSE Plastic, Paint, Metal, HSE Plastic
Surface TreatmentFlame Treat, Ink, Mold Release Agent, Corona Treat
Surface TextureSmooth
Surface ProfileConvex, Flat, Flexible, Compound Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.