Features & Benefits

  • 7.2 mil perforated white/black flexible vinyl offers superior conformability to curved surfaces
  • 70/30 vinyl perforation pattern yields 70% material for optimal viewing of the printed image
  • 70/30 pattern yields 30% light transmission
  • Offers visibility from the inside looking out with only limited visibility from the outside looking in
  • Removable pressure-sensitive acrylic adhesive bonds well to smooth glass surface; clean removability from glass for up to one year
  • Excellent printability via Solvent Screen, UV Inkjet,Solvent Inkjet, UV Screen, and Latex
  • Adhesive adheres well to an exterior glass surface over a wide range of temperatures
  • Excellent layflat release liner properties for printing and converting
  • Product is suitable for exterior mounted window graphics
  • Approved and specified by JC Decaux for bus shelters
  • Approved and specified by Titan for non-vehicle advertising

Please note: This product is not intended for sheet-form offset. Recommendations: Please refer to "Application Configuration Guidelines" and the "Flexcon's Window Graphics Installation Guide” for more information.
For Inkjet Printing: • Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming

Product Applications

  • Better - Promotional Advertising - Window Graphics - Perforated

Contact: +1 508 885 8200

Technical Data

Physical Properties

ValueThickness (Mils[microns])
Laminate7.2 (183) +/- 15%
Adhesive 0.8-0.9 (20-23) +/- 0.1 (3)
Liner7.5 (191) +/- 15%

Test Method: ASTM D 3652 (Modified for use with non-tape products)

ValueDimensional Stability (%)

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel12(132)

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Expected Shear

PropertyValueTest Method
Expected Shear Room Temp (hours): 0.10ASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load
Tack (gm/sq cm)130ASTM D 2979
Expected Exterior LifeTwo years
Service Temperature Range-40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature40°F (4.5°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

Title Description
Adhesive Removable
Product Agency N/A
Color Family White/Black
Converting Roll to Sheet
Double Face 0
Film Family Vinyl
Master Web Width 53.000
Other Available Widths 60.00
Print Technology Solvent Screen,UV Inkjet - Wide,Solvent Inkjet,UV Screen,HP Latex
Quilon 0
Remoist 0
Surface Type Glass
Surface Treatment N/A
Surface Texture Smooth
Surface Profile Flat,Rigid

Pricing Overview

MSI Pricing

Roll Pricing

SQF Pricing

Quick Ship

Stock Code Type Sheets In Box Trimmed Width Length Core Size MA NE CA Canada
STS7030/6 R N/A Y 60 1000 3 - - X -
STS7030/60 R N/A N 60 0 6 X - X -
STSWBF7030 R N/A N 53 0 6 X - X -
SWBF7030B R N/A Y 53 300 3 X - X -
SWBF7030E R N/A Y 53 150 3 X - - X
SWBF7030Z R N/A Y 53 1000 3 - - X -

Historical Sales

Please log in to view sales figures.

Product Performance and Suitability

All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.

Modified on: