FLX000084
8 MIL 60/40 WHITE/BLACK FLEXIBLE PERFORATED FILM for Interior & Exterior Window Graphics
Contact: +1 508 885 8200
Please note: This product is not intended for sheet-form offset. For inkjet printing: • Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming This product is part of Flexcon's Bus and Train Wrap Advertising System with BusArt™ OV5040C or BusArt™ OV5055.. SeeThru-Sign® STSWBF2 and BusArt™ OV5040C meet flammability requirements ASTM E 162 – Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source and ASTM E 662 – Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials Please refer to Flexcon's Window Graphics Installation Guide for more information.Application Awareness: FLEXcon does not recommend using this product for angled window surfaces. Damage may occur when film is removed from substrates that are protected with anti-reflection or scratch-resistant coatings.
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Film | 7.2 +/- 10% | 183 |
| Adhesive | 0.8-0.9 +/- 0.1 | 20-23 +/- 3 |
| Liner | 7.4 +/- 10% | 188 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.4 |
| TD | 0.4 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Auto Glass | 13 | 143 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear | ||
| Tack | 100 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | Flammability ASTM E 162, ASTM E 662 | |
| Service Temperature | -40°F to 176°F (40°C to 80°C) | |
| Minimum Application Temperature | 40°F (4.5°C) | |
| Storage Stability | Two years when stored at 70°F (21°C) and 50% relative humidity |
| Title | Description |
|---|---|
| Adhesive | Removable |
| Product Agency | OUTFRONT Media, Vector Media |
| Color Family | White/Black |
| Converting | Roll to Sheet |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | 53 |
| Print Technology | Screen - Solvent, Screen - UV, Inkjet - HP Latex, Inkjet - Solvent, Inkjet - UV Wide Format |
| Surface Type | Glass |
| Surface Treatment | N/A |
| Surface Texture | Smooth |
| Surface Profile | Flat, Rigid, Compound Curve |
| Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
|---|---|---|---|---|---|---|---|---|---|---|
| 1042468 | Roll | 1 | Y | 53 | 150 | 3 | X | - | - | X |
| 1042469 | Roll | 1 | Y | 53 | 300 | 3 | X | - | X | - |
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.