FLX069870
All narrow-format UV inkjet systems are different; therefore, we recommend "fit-for-use" testing. For laser diecutability, please check with your equipment manufacturer. *Lysol® is a registered trademark of Reckitt Benckiser LLC. Please Note: MedFlex® Plus is not intended for direct skin contact nor for implantable devices. For skin contact applications, please contact Flexcon at 508.885.8296 for information on our Flexcon® DermaFlex™ product line. “Fit-for-use” testing is recommended under actual application conditions.
Contact: +1 508 885 8200
| Value | Thickness (Mils[microns]) |
|---|---|
| Film | 2.0 (51) +/- 10% |
| Adhesive | 0.9-1.0 (23-25) +/- 0.1 (3) |
| Liner | 3.1 (79) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Value | Dimensional Stability (%) |
|---|---|
| No Shrinkage Observed |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| ABS | 60 | (660) |
| Acrylic | 77 | (847) |
| Acrylic Powder Paint | 59 | (649) |
| Aluminum | 54 | (594) |
| Epoxy Powder Paint | 67 | (737) |
| Fiberglass | 42 | (462) |
| Glass | 68 | (748) |
| Painted Metal | 57 | (617) |
| Polycarbonate | 58 | (638) |
| Polyester | 87 | (957) |
| Polyester Powder Paint | 55 | (605) |
| Polypropylene | 15 | (165) |
| Polyurethane Powder Paint | 72 | (792) |
| Stainless Steel | 55 | (605) |
| Styrene | 54 | (594) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Property | Value | Test Method |
|---|---|---|
| Expected Shear | Room Temp (hours): 30 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Tack (gm/sq cm) | 1030 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Service Temperature Range | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | UL Recognized |
| Color Family | Silver |
| Converting | Roll Form |
| Double Face | 0 |
| Film Family | Polyester |
| Master Web Width | 54.000 |
| Other Available Widths | N/A |
| Print Technology | Conventional Offset,UV Offset,UV Letterpress,UV Inkjet - Narrow,UV Screen,UV Flexo,Solvent Flexo,Solvent Screen,Water Flexo,Xeikon,Thermal Transfer |
| Quilon | 0 |
| Remoist | 0 |
| Surface Type | Powder Coated Paint,Stainless Steel,Steel,Styrene,TPO Plastic,PVC,ABS,Aluminum,Fiberglass,Glass,HDPE,HSE Plastic,LSE Plastic,Metal,Paint,Paint (non-vinyl based),PET,Polycarbonate,Polypropylene |
| Surface Treatment | N/A |
| Surface Texture | Frosted,Rough,Smooth |
| Surface Profile | Flat,Rigid |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
| Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
|---|---|---|---|---|---|---|---|---|---|---|
| MD716S | R | N/A | N | 54 | 0 | 6 | X | X | - | - |
Please log in to view sales figures.
All of the descriptive information, the typical performance data, and recommendations for the use of Flexcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by Flexcon. All purchasers of Flexcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of Flexcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
Modified on: